Source-backed diagnostic reference

P1376 Code: Meaning & Diagnostic Guide

Ignition Ground Circuit

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1376 mean?

  • BUICK: Ignition Ground Circuit Source
  • CADILLAC: Ignition Ground Circuit Source
  • CHEVY: Ignition Ground Circuit Source
  • CHRYSLER: Ignition Ground Circuit Source
  • GM: Ignition Ground Circuit Source
  • GMC: Ignition Ground Circuit Source
  • JAGUAR: Ignition Coil Cylinder 6 Early Activation Fault Source
  • OLDSMOBILE: Ignition Ground Circuit Source
  • OTHER: Ignition Coil - Cylinder 6 - Early Activation Fault Source
  • SATURN: Ignition Ground Circuit Source
  • VOLKSWAGEN: Cylinder 8 Ignition Circuit Open Source

P1376 quick answer

P1376 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied references associate it with an ignition ground circuit on several makes, but list different ignition-circuit meanings for Jaguar and Volkswagen. Confirm the definition for your vehicle before diagnosing it.

Is P1376 generic or manufacturer-specific?

P1376 currently has manufacturer-labelled reference definitions for BUICK, CADILLAC, CHEVY, CHRYSLER, GM, GMC and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1376 works in the vehicle

An ignition ground circuit is the electrical path that provides a ground connection for part of the ignition system. Other listed interpretations of P1376 refer to early activation of a cylinder 6 ignition coil or an open cylinder 8 ignition circuit. An open circuit means electrical continuity may be interrupted. These definitions are not interchangeable.

P1376 symptoms

Depending on the vehicle and the applicable definition, possible symptoms could include a check-engine light, rough running, misfiring, or reduced performance. The code alone does not confirm that any of these symptoms are present.

Possible causes of P1376

Possible causes depend on the vehicle-specific meaning and may include a wiring, connector, or ground-path problem, or an ignition-system fault. P1376 by itself does not identify a failed component.

How to diagnose P1376

  1. Confirm the vehicle's make, model, year, engine, and market, then check a reliable service source for its exact P1376 definition.
  2. Scan for other stored codes and review freeze-frame data, which records operating conditions when the code set.
  3. Use vehicle-specific diagnostic procedures to check the relevant ignition wiring, connectors, and ground path for damage or poor connections.
  4. Have a qualified technician perform any electrical tests or further diagnosis; do not replace parts based on the code alone.

How to fix P1376

The repair depends on the confirmed vehicle-specific definition and test results. A technician may need to address a verified wiring, connector, ground, or ignition-system fault. Avoid replacing an ignition coil or other component unless diagnosis supports it.

Can I drive with P1376?

P1376 alone does not establish whether a vehicle is safe to drive. If the engine runs roughly, loses power, stalls, or the warning light flashes, stop driving when safe and arrange prompt professional assessment. If there are no noticeable symptoms, consult the vehicle manual or a technician about whether to continue driving.

P1376 frequently asked questions

What does code P1376 mean?

Its meaning varies by manufacturer and vehicle. The supplied references list ignition-ground, cylinder 6 coil early-activation, and cylinder 8 ignition-circuit-open interpretations.

Does P1376 mean the ignition coil has failed?

No. Some references describe an ignition-coil-related meaning, but the code does not by itself confirm a failed coil. Verify the definition for the specific vehicle and diagnose the circuit.

Can I drive with P1376?

The code alone cannot determine whether driving is safe. Consider the vehicle's symptoms and consult a qualified technician, especially if it misfires, stalls, or loses power.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.