Source-backed diagnostic reference

P1377 Code: Meaning & Diagnostic Guide

IC Module CAM Pulse To 4X Reference Pulse Comparison

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1377 mean?

  • BUICK: IC Module CAM Pulse To 4X Reference Pulse Comparison Source
  • CADILLAC: IC Module CAM Pulse To 4X Reference Pulse Comparison Source
  • CHEVY: IC Module CAM Pulse To 4X Reference Pulse Comparison Source
  • CHRYSLER: IC Module CAM Pulse To 4X Reference Pulse Comparison Source
  • GM: IC Module CAM Pulse To 4X Reference Pulse Comparison Source
  • GMC: IC Module CAM Pulse To 4X Reference Pulse Comparison Source
  • OLDSMOBILE: IC Module CAM Pulse To 4X Reference Pulse Comparison Source
  • SATURN: IC Module CAM Pulse To 4X Reference Pulse Comparison Source
  • VOLKSWAGEN: Cylinder 8 Ignition Circuit Short To B+ Source

P1377 quick answer

P1377 is a manufacturer-specific diagnostic trouble code, so its meaning depends on the vehicle. In the supplied references, many GM-related entries describe an ignition-control-module comparison between a camshaft pulse and a 4X reference pulse. The Volkswagen entry instead describes a cylinder 8 ignition circuit short to battery voltage (B+). Confirm the definition for your exact vehicle before diagnosing it.

Is P1377 generic or manufacturer-specific?

P1377 currently has manufacturer-labelled reference definitions for BUICK, CADILLAC, CHEVY, CHRYSLER, GM, GMC and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1377 works in the vehicle

A diagnostic trouble code (DTC) records a condition detected by a vehicle’s control system; it does not by itself identify a failed part. “CAM pulse” refers to a camshaft-related timing signal, while “4X reference pulse” is a reference signal used by the control system. “B+” means battery-positive voltage. These descriptions are not interchangeable, so the vehicle’s make, model, year, and engine matter.

P1377 symptoms

The code alone does not establish what symptoms are present. Depending on the vehicle and the underlying issue, there may be no obvious symptoms or there may be engine-running or ignition-related concerns. Do not assume a particular symptom from P1377 alone.

Possible causes of P1377

The code description alone does not confirm a failed component or cause. Depending on the vehicle-specific definition, diagnosis may involve checking the relevant signal or circuit and its connections. The Volkswagen description points to a possible ignition-circuit short to B+, but this should be verified using vehicle-specific diagnostic information.

How to diagnose P1377

  1. Confirm the vehicle’s make, model, year, engine, and exact stored code; look up P1377 in reliable service information for that vehicle.
  2. Use a scan tool to record all stored codes and available freeze-frame data before clearing anything.
  3. Follow the vehicle-specific diagnostic procedure for the applicable P1377 definition; inspect related wiring and connectors for visible damage or poor connections.
  4. If testing requires electrical measurements or ignition-system work, use the correct service information and suitable equipment, or have a qualified technician perform it.
  5. Recheck for codes after any confirmed repair and follow the vehicle-specific verification procedure.

How to fix P1377

There is no single repair for P1377 across all vehicles. Repair only the condition confirmed by vehicle-specific testing; do not replace an ignition module, sensor, or other part based on the code alone. Consult a qualified technician if the definition or testing procedure is unclear.

Can I drive with P1377?

The code alone cannot determine whether the vehicle is safe to drive. If the engine runs poorly, stalls, or shows other concerning symptoms, stop when safe and arrange professional assessment. Otherwise, consult the vehicle’s manual or a technician for guidance specific to your vehicle.

P1377 frequently asked questions

What does P1377 mean?

Its meaning varies by manufacturer and vehicle. The supplied references list a cam-pulse-to-4X-reference comparison for several makes and a cylinder 8 ignition circuit short to B+ for Volkswagen.

Does P1377 identify a failed part?

No. It identifies a detected condition, and further vehicle-specific testing is needed to find the cause.

Can I drive with P1377?

The code alone is not enough to judge drivability. Consider the vehicle’s symptoms and seek vehicle-specific advice, especially if it runs poorly or stalls.

Should I clear P1377 before diagnosis?

Record the code and available freeze-frame data first. Clearing it may remove useful diagnostic information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.