Source-backed diagnostic reference

P1382 Code: Meaning & Diagnostic Guide

CYP Sensor A No Signal

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1382 mean?

  • ACURA: CYP Sensor A No Signal Source
  • HONDA: CYP Sensor A No Signal Source
  • INFINITI: CYP Sensor A No Signal Source
  • MAZDA: Camshaft Position Timing Solenoid 1 Circuit Source
  • OTHER: Variable Cam Timing Solenoid #1 Circuit Malfunction Source

P1382 quick answer

P1382 is a manufacturer-specific powertrain code. A general listing describes it as a variable cam timing solenoid #1 circuit malfunction, but the meaning differs by vehicle: some listings define it as a CYP sensor A no-signal code, while a Mazda listing describes a camshaft position timing solenoid 1 circuit issue. Check the code definition for the exact make, model, year, and engine before diagnosing it.

Is P1382 generic or manufacturer-specific?

P1382 currently has manufacturer-labelled reference definitions for ACURA, HONDA, INFINITI, MAZDA, OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1382 works in the vehicle

A diagnostic trouble code (DTC) records a condition detected by a vehicle’s control system. “Circuit malfunction” refers to an electrical control path not behaving as expected; it does not by itself prove that a solenoid or another component has failed. “No signal” means the system did not detect an expected sensor signal.

P1382 symptoms

The check-engine light may be on. Other symptoms are not established by the supplied evidence and can vary with the vehicle and the code’s exact definition.

Possible causes of P1382

Depending on the vehicle-specific definition, possible areas to investigate may include the relevant sensor or timing-solenoid circuit, its wiring and connectors, or the controlled component. P1382 alone does not identify a confirmed cause or failed part.

How to diagnose P1382

  1. Confirm the vehicle’s make, model, year, and engine, then check a reliable vehicle-specific code reference.
  2. Use a scan tool to verify P1382 and note any other stored codes and available freeze-frame information.
  3. Follow the manufacturer’s diagnostic procedure for the confirmed code definition; inspect the relevant circuit and connectors for visible damage or poor connections.
  4. Have a qualified technician perform any electrical tests and interpret the results before replacing parts.

How to fix P1382

There is no single repair for P1382 across all vehicles. Repair decisions should follow the vehicle-specific diagnosis; do not replace a sensor or solenoid based on the code alone.

Can I drive with P1382?

The code alone does not establish whether continued driving is safe. If the vehicle runs poorly, loses power, stalls, or shows other serious warning signs, stop when safe and arrange professional assessment. Otherwise, consult the vehicle’s manual or a qualified technician promptly.

P1382 frequently asked questions

What does P1382 mean?

It is a manufacturer-specific powertrain code. A general listing associates it with a variable cam timing solenoid circuit, but the precise meaning depends on the vehicle.

Does P1382 mean the solenoid has failed?

No. The code reports a detected condition, not a confirmed failed component. Vehicle-specific testing is needed.

Why do code descriptions for P1382 differ?

Some diagnostic codes have different definitions across manufacturers. The vehicle’s exact make, model, year, and engine are needed to select the applicable definition.

Can I keep driving with P1382?

The code alone cannot determine that. Consider how the vehicle is behaving, follow the owner’s manual, and seek professional advice—especially if there is stalling, power loss, or poor running.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.