P1391 Code: Meaning & Diagnostic Guide
Glow Plug Circuit Low Input (Bank #1)
What does P1391 mean?
- BUICK: Wheel Speed Sensor 1, G-Sensor Circuit Performance Source
- CADILLAC: Wheel Speed Sensor 1, G-Sensor Circuit Performance Source
- CHEVY: Wheel Speed Sensor 1, G-Sensor Circuit Performance Source
- CHRYSLER: Wheel Speed Sensor 1, G-Sensor Circuit Performance Source
- DODGE: Intermittent Loss of CMP Or CKP Source
- FORD: Glow Plug Circuit Low Input Bank 1 Source
- GM: Wheel Speed Sensor 1 G-Sensor Circuit Performance Source
- GMC: Wheel Speed Sensor 1 G-Sensor Circuit Performance Source
- JEEP: Intermittent Loss of CMP Or CKP Source
- LINCOLN: Glow Plug Circuit Low Input Bank 1 Source
- MERCURY: Glow Plug Circuit Low Input Bank 1 Source
- MITSUBISHI: Intermittent Loss Of CMP Or CKP Sensor Signals Source
- OLDSMOBILE: Wheel Speed Sensor 1 G-Sensor Circuit Performance Source
- OTHER: Glow Plug Circuit Low Input (Bank #1) Source
- PLYMOUTH: Intermittent Loss of CMP Or CKP Source
- PONTIAC: Intermittent Loss of CMP Or CKP Source
- SATURN: Wheel Speed Sensor 1 G-Sensor Circuit Performance Source
- VOLKSWAGEN: CMP Sensor Bank 2 Short To Ground Source
- GENERIC: Glow Plug Circuit Low Input (Bank #1) Source
P1391 quick answer
P1391 is listed generically as “Glow Plug Circuit Low Input (Bank 1).” Its meaning can differ by vehicle, so confirm the definition using the vehicle’s year, make, model, engine, and manufacturer-specific service information before diagnosing it.
Is P1391 generic or manufacturer-specific?
P1391 has a generic source-backed definition in this database, with additional manufacturer-labelled references for BUICK, CADILLAC, CHEVY, CHRYSLER, DODGE, FORD and others. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1391 works in the vehicle
For the generic definition, the engine computer is detecting an electrical input below the expected range in the Bank 1 glow-plug circuit. Bank 1 is the side of the engine that contains cylinder 1. P1391 is not interpreted the same way on every vehicle; some manufacturer-specific listings assign it to other systems, so the generic description may not apply to a particular vehicle.
P1391 symptoms
Symptoms depend on the vehicle-specific meaning and may be absent. If the glow-plug definition applies, possible context includes difficult cold starting, rough running after startup, or a warning light. Other vehicle-specific definitions may produce different symptoms.
Possible causes of P1391
If the glow-plug definition is confirmed, possible causes include a glow plug, wiring, connector, fuse, relay, or control circuit issue. These are possibilities, not confirmed failures. If the vehicle uses another definition for P1391, the relevant causes will differ.
How to diagnose P1391
- Verify the code with a scan tool and record the vehicle’s year, make, model, engine, and any other stored codes.
- Check manufacturer-specific service information to confirm what P1391 means for that vehicle.
- Review freeze-frame data and note when the code was recorded, such as during a cold start or while driving.
- If the confirmed definition concerns glow plugs, have the circuit, connectors, wiring, and related controls tested using the vehicle’s service procedures.
- Use test results to identify the fault before replacing parts; consult a qualified technician if diagnosis requires specialized equipment.
How to fix P1391
There is no single repair for P1391 across all vehicles. Confirm the vehicle-specific definition and diagnose the relevant circuit before repairing or replacing a component. Avoid treating the generic glow-plug description as proof that a glow plug has failed.
Can I drive with P1391?
Driving impact depends on the vehicle-specific meaning and symptoms. If the vehicle starts and runs normally, arrange diagnosis promptly and monitor for changes. If it stalls, becomes difficult to control, has severe running problems, or displays other important warnings, stop when safe and seek professional assistance.
P1391 frequently asked questions
What does P1391 mean?
The supplied generic listing defines P1391 as “Glow Plug Circuit Low Input (Bank 1),” but manufacturer-specific definitions can differ. Verify it for the exact vehicle.
Does P1391 mean a glow plug has failed?
No. Even when the glow-plug definition applies, the code indicates a low circuit input, not a confirmed failed component. Wiring, connectors, controls, or other circuit parts may also need testing.
Can I drive with code P1391?
That depends on the vehicle-specific meaning and how it runs. Arrange diagnosis, and seek assistance promptly if the vehicle stalls, runs severely poorly, or shows other significant warnings.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.