Source-backed diagnostic reference

P1393 Code: Meaning & Diagnostic Guide

Wheel Speed Sensor 1, G-Sensor Circuit High Voltage

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1393 mean?

  • BUICK: Wheel Speed Sensor 1, G-Sensor Circuit High Voltage Source
  • CADILLAC: Wheel Speed Sensor 1, G-Sensor Circuit High Voltage Source
  • CHEVY: Wheel Speed Sensor 1, G-Sensor Circuit High Voltage Source
  • CHRYSLER: Wheel Speed Sensor 1, G-Sensor Circuit High Voltage Source
  • FORD: Glow Plug Circuit Low Input Bank 2 Source
  • GM: Wheel Speed Sensor 1 G-Sensor Circuit High Voltage Source
  • GMC: Wheel Speed Sensor 1 G-Sensor Circuit High Voltage Source
  • JAGUAR: Variable Valve Timing Solenoid A Circuit High Input Source
  • LINCOLN: Glow Plug Circuit Low Input Bank 2 Source
  • MERCURY: Glow Plug Circuit Low Input Bank 2 Source
  • OLDSMOBILE: Wheel Speed Sensor 1 G-Sensor Circuit High Voltage Source
  • OTHER: Glow Plug Circuit Low Input (Bank #2) Source
  • SATURN: Wheel Speed Sensor 1 G-Sensor Circuit High Voltage Source
  • VOLKSWAGEN: Ignition Coil Power Output Stage 1 Malfunction Source

P1393 quick answer

P1393 is a manufacturer-specific diagnostic trouble code, so its meaning depends on the vehicle. The supplied reference lists different definitions, including a wheel-speed/G-sensor circuit voltage issue, a Bank 2 glow-plug circuit low input, a variable valve-timing solenoid circuit high input, and an ignition-coil power-stage malfunction. Confirm the vehicle-specific definition before diagnosing or replacing parts.

Is P1393 generic or manufacturer-specific?

P1393 currently has manufacturer-labelled reference definitions for BUICK, CADILLAC, CHEVY, CHRYSLER, FORD, GM and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1393 works in the vehicle

P1393 is an alphanumeric fault code reported by a vehicle’s control system. The reference evidence does not establish one generic definition: the same code is assigned to different systems by different manufacturers. “Circuit high” or “circuit low” describes an electrical reading outside the expected range; it does not, by itself, prove which component has failed.

P1393 symptoms

Symptoms depend on the vehicle and the system associated with P1393. A warning light may be the only indication. Depending on the confirmed definition, there could also be changes involving braking or stability-control warnings, engine operation, or diesel glow-plug performance. The code alone does not confirm that any of these symptoms will occur.

Possible causes of P1393

Possible causes depend on the vehicle-specific definition and may include a wiring or connector problem, an abnormal circuit signal, or a component or control-system issue. P1393 alone does not identify a confirmed failed part.

How to diagnose P1393

  1. Record the vehicle’s make, model, year, engine, and any relevant options.
  2. Use a suitable scan tool to read the code and any related codes; note which control module reported it.
  3. Check manufacturer service information for the exact P1393 definition and diagnostic procedure for that vehicle.
  4. Review available freeze-frame data, which records operating conditions when the code was set.
  5. Have the relevant circuit and components checked using the vehicle-specific procedure before deciding on a repair.

How to fix P1393

There is no single repair for P1393 across all vehicles. Base repairs on the verified code definition and test results; do not replace a sensor, solenoid, glow plug, or other part based only on the code. Use qualified service help if the required testing is unclear.

Can I drive with P1393?

The code alone cannot establish whether a vehicle is safe to drive. Check the owner’s manual and consider the vehicle’s behavior and any warning lights. If braking or stability-control warnings appear, the vehicle behaves abnormally, or you are unsure, stop in a safe place and seek qualified advice.

P1393 frequently asked questions

What does P1393 mean?

It depends on the vehicle. The supplied reference lists several different manufacturer-specific definitions, so verify the meaning using the vehicle’s identification details and manufacturer service information.

Does P1393 identify a failed part?

No. A diagnostic trouble code identifies a detected condition, not necessarily the failed component. Testing is needed to determine the cause.

Can I clear P1393 without diagnosing it?

Clearing a code does not repair its cause. Record the code and available freeze-frame information first, then diagnose it using the correct vehicle-specific procedure.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.