Source-backed diagnostic reference

P1399 Code: Meaning & Diagnostic Guide

Glow Plug Circuit High Side, High Input

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1399 mean?

  • BUICK: Wheel Speed Sensor 2, G-Sensor Circuit Intermittent Source
  • CADILLAC: Wheel Speed Sensor 2, G-Sensor Circuit Intermittent Source
  • CHEVY: Wheel Speed Sensor 2, G-Sensor Circuit Intermittent Source
  • CHRYSLER: Wheel Speed Sensor 2, G-Sensor Circuit Intermittent Source
  • DODGE: Wait To Start Lamp Circuit Open Or Shorted Source
  • FORD: Glow Plug Circuit High Side High Input Source
  • GM: Wheel Speed Sensor 2 G-Sensor Circuit Intermittent Source
  • GMC: Wheel Speed Sensor 2 G-Sensor Circuit Intermittent Source
  • JEEP: Wait To Start Lamp Circuit Open Or Shorted Source
  • LINCOLN: Glow Plug Circuit High Side High Input Source
  • MERCURY: Glow Plug Circuit High Side High Input Source
  • OLDSMOBILE: Wheel Speed Sensor 2 G-Sensor Circuit Intermittent Source
  • OTHER: Glow Plug Circuit High Side, High Input Source
  • PLYMOUTH: Wait To Start Lamp Circuit Open Or Shorted Source
  • PONTIAC: Wait To Start Lamp Circuit Open Or Shorted Source
  • SATURN: Wheel Speed Sensor 2 G-Sensor Circuit Intermittent Source
  • VOLKSWAGEN: Engine RPM Signal Short To B+ Source
  • GENERIC: Glow Plug Circuit High Side, High Input Source

P1399 quick answer

P1399 has different meanings across vehicles. The supplied generic definition is “Glow Plug Circuit High Side, High Input,” indicating that the control module detected an unexpectedly high electrical signal in that circuit. Confirm the code definition for the vehicle’s make, model, year, and engine before diagnosing it.

Is P1399 generic or manufacturer-specific?

P1399 has a generic source-backed definition in this database, with additional manufacturer-labelled references for BUICK, CADILLAC, CHEVY, CHRYSLER, DODGE, FORD and others. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1399 works in the vehicle

A “high input” means the module sensed a voltage or signal higher than expected; it does not identify a failed part by itself. P1399 is not used consistently across manufacturers: some vehicle-specific references associate it with a wheel-speed/G-sensor circuit or a wait-to-start lamp circuit instead.

P1399 symptoms

Depending on the vehicle-specific meaning, a warning light, hard starting, or an indicator that behaves unexpectedly may occur. The code alone does not confirm that any particular symptom or fault is present.

Possible causes of P1399

If the vehicle’s verified definition concerns the glow plug circuit, possible areas to investigate include its wiring, connectors, or control circuit. These are diagnostic possibilities, not confirmed causes. Other vehicle-specific definitions require a different diagnostic path.

How to diagnose P1399

  1. Confirm the vehicle’s make, model, year, engine, and exact stored code with a scan tool.
  2. Check reliable vehicle-specific service information to verify what P1399 means for that vehicle.
  3. Record any other codes and available freeze-frame data before clearing codes.
  4. If the verified definition concerns the glow plug circuit, have a qualified technician check the circuit and connections using the vehicle’s service procedure.
  5. Recheck for codes after diagnosis or repair to see whether P1399 returns.

How to fix P1399

Do not replace a glow plug or other component based on P1399 alone. The correct repair depends on the vehicle-specific code definition and test results. Use qualified service assistance if electrical diagnosis is needed.

Can I drive with P1399?

Driving suitability depends on the vehicle and its symptoms. If the vehicle starts and runs normally, consult vehicle-specific guidance and arrange diagnosis; stop in a safe place and seek assistance if it stalls, runs poorly, or displays a serious warning.

P1399 frequently asked questions

What does code P1399 mean?

The supplied generic definition is a glow plug circuit high-side, high-input fault, but P1399 can mean something different on particular vehicles. Verify it using vehicle-specific information.

Does P1399 prove a glow plug has failed?

No. The code describes a detected circuit signal, not a confirmed failed component. Testing is needed to identify the cause.

Can P1399 refer to a wheel-speed sensor or wait-to-start lamp?

Yes. The supplied references list those as vehicle-specific interpretations, so the vehicle’s make, model, year, and engine matter.

Can I keep driving with P1399?

The code alone does not determine whether driving is appropriate. Consider how the vehicle behaves, follow its warning messages, and arrange diagnosis; seek assistance if it runs poorly or shows a serious warning.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.