Source-backed diagnostic reference

P1406 Code: Meaning & Diagnostic Guide

Heated Catalyst Internal Control Module Checksum ROM Error

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1406 mean?

  • BMW: Heated Catalyst Internal Control Module Checksum ROM Error Source
  • BUICK: EGR Valve Pintle Position Circuit Source
  • CADILLAC: EGR Valve Pintle Position Circuit Source
  • CHEVY: EGR Valve Pintle Position Circuit Source
  • CHRYSLER: EGR Valve Pintle Position Circuit Source
  • FORD: Differential Pressure Feedback Electronic Sensor Circuit Downstream Hose Source
  • GM: EGR Valve Pintle Position Circuit Source
  • GMC: EGR Valve Pintle Position Circuit Source
  • LINCOLN: Differential Pressure Feedback Electronic Sensor Circuit Downstream Hose Source
  • MAZDA: DPFE Sensor Downstream Hose Off Or Plugged Source
  • MERCURY: Differential Pressure Feedback Electronic Sensor Circuit Downstream Hose Source
  • OLDSMOBILE: EGR Valve Pintle Position Circuit Source
  • OTHER: Exhaust Gas Recirculation (EGR) Position Sensor Performance Source
  • PLYMOUTH: EGR Valve Pintle Position Circuit Source
  • PONTIAC: EGR Valve Pintle Position Circuit Source
  • SATURN: EGR Valve Pintle Position Circuit Source
  • TOYOTA: Turbo Pressure Sensor Range Performance Problem Source
  • VOLKSWAGEN: EGR Temperature Sensor Range Performance Source

P1406 quick answer

P1406 is a manufacturer-specific diagnostic trouble code. A general reference defines it as an Exhaust Gas Recirculation (EGR) position sensor performance issue, but the exact meaning depends on the vehicle. Check the code against the vehicle’s year, make, model, and engine before diagnosing it.

Is P1406 generic or manufacturer-specific?

P1406 currently has manufacturer-labelled reference definitions for BMW, BUICK, CADILLAC, CHEVY, CHRYSLER, FORD and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1406 works in the vehicle

The EGR system routes some exhaust gas back into the engine to help control emissions. Its position sensor reports how the EGR valve is moving. A performance code means the reported position may not match what the control system expects; it does not, by itself, confirm that a particular part has failed. Reference entries also show other P1406 definitions, so vehicle-specific service information is essential.

P1406 symptoms

Some vehicles may have a check-engine light, rough running, reduced performance, or no noticeable symptoms. These are possibilities, not symptoms established by the code alone.

Possible causes of P1406

Depending on the vehicle-specific definition and test results, possibilities may include an EGR position sensor or valve issue, wiring or connector trouble, or a related pressure-sensing hose or circuit issue. P1406 alone does not identify the cause.

How to diagnose P1406

  1. Confirm the vehicle’s year, make, model, engine, and the exact stored code.
  2. Look up P1406 in manufacturer-specific service information; do not assume a generic EGR definition applies.
  3. Scan for other codes and review available freeze-frame data, which records engine conditions when the fault was detected.
  4. Follow the vehicle’s diagnostic procedure to check the relevant sensor readings, wiring, connectors, and any related hoses or passages.
  5. Use test results to identify the fault before replacing parts, then clear the code and verify the repair according to service guidance.

How to fix P1406

The correct repair depends on the vehicle-specific definition and diagnostic results. A qualified technician may need to inspect or test the applicable EGR, sensor, wiring, or pressure-sensing components. Avoid replacing an EGR valve or sensor based on P1406 alone.

Can I drive with P1406?

The code alone cannot establish whether the vehicle is safe to drive. If the engine runs poorly, loses power, stalls, or shows other warning signs, limit driving and arrange an inspection. If there are no symptoms, consult the owner’s manual and have the code diagnosed promptly.

P1406 frequently asked questions

What does code P1406 mean?

A general reference describes P1406 as EGR position sensor performance, but its exact definition varies by vehicle. Check manufacturer-specific information for your vehicle.

Does P1406 mean the EGR valve has failed?

No. The code does not confirm a failed valve or any other specific component. Diagnosis is needed to determine what is causing the code.

Can I keep driving with P1406?

The code alone does not determine drivability or safety. Consider symptoms and the owner’s manual, and arrange diagnosis; limit driving if the vehicle runs poorly or loses power.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.