P1408 Code: Meaning & Diagnostic Guide
Intake Manifold Pressure Sensor Circuit
What does P1408 mean?
- BUICK: Intake Manifold Pressure Sensor Circuit Source
- CADILLAC: Intake Manifold Pressure Sensor Circuit Source
- CHEVY: Intake Manifold Pressure Sensor Circuit Source
- CHRYSLER: Intake Manifold Pressure Sensor Circuit Source
- FORD: EGR Flow Out of Self-Test Range Source
- GEO: MAP Sensor Circuit Source
- GM: Intake Manifold Pressure Sensor Circuit Source
- GMC: Intake Manifold Pressure Sensor Circuit Source
- JAGUAR: Exhaust Gas Recirculation Thermister Source
- LINCOLN: EGR Flow Out of Self-Test Range Source
- MAZDA: EGR System Flow Out Of Key On Engine Running Self Test Range Source
- MERCURY: EGR Flow Out of Self-Test Range Source
- OLDSMOBILE: Intake Manifold Pressure Sensor Circuit Source
- OTHER: EGR Flow Out Of Self Test Range Source
- PLYMOUTH: Intake Manifold Pressure Sensor Circuit Source
- PONTIAC: Intake Manifold Pressure Sensor Circuit Source
- SATURN: Intake Manifold Pressure Sensor Circuit Source
- SUZUKI: Maniforld Differential Pressure Sensor Circuit Fault Source
- VOLKSWAGEN: EGR Temperature Sensor Signal Too High Source
P1408 quick answer
P1408 is a manufacturer-specific powertrain code. A generic listing describes it as “EGR flow out of self-test range,” but some vehicles use P1408 for an intake manifold pressure sensor circuit or another system. Check the definition for your exact vehicle before diagnosing it.
Is P1408 generic or manufacturer-specific?
P1408 currently has manufacturer-labelled reference definitions for BUICK, CADILLAC, CHEVY, CHRYSLER, FORD, GEO and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1408 works in the vehicle
An EGR self-test checks whether exhaust gas recirculation flow is within an expected range under specified conditions. “Out of range” means the test result did not meet the vehicle’s criteria; it does not identify a failed part. The code’s meaning varies by manufacturer and vehicle.
P1408 symptoms
Depending on the vehicle and the underlying issue, the check-engine light may be the only sign. Possible symptoms can include rough running, reduced performance, stalling, or changes in fuel use or emissions, but none is guaranteed by this code alone.
Possible causes of P1408
Possible causes depend on the vehicle-specific definition and test results. For an EGR-related definition, possibilities may include restricted or leaking passages, a valve or control problem, or wiring or sensor issues. For a pressure-sensor-circuit definition, sensor, connector, wiring, or related circuit issues may be considered. These are possibilities, not confirmed failures.
How to diagnose P1408
- Confirm the vehicle’s year, make, model, engine, and market, then look up P1408 in reliable vehicle-specific service information.
- Read all stored and pending codes and save freeze-frame data before clearing anything.
- Use the vehicle-specific diagnostic procedure to assess relevant sensor readings, wiring, connectors, and system operation.
- Check for related codes and inspect accessible components for damage or obvious restrictions; avoid replacing parts based on P1408 alone.
- If the test procedure or equipment is unfamiliar, have a qualified technician diagnose the vehicle.
How to fix P1408
There is no single repair for P1408 across all vehicles. The appropriate repair depends on the manufacturer-specific definition and test results; it may involve addressing a circuit, sensor, control, or flow issue. Verify the repair by following the applicable service procedure and checking whether the code returns.
Can I drive with P1408?
P1408 alone does not establish whether a vehicle is safe to drive. If the engine runs normally and no warning signs are present, consult vehicle-specific guidance and arrange diagnosis soon. Stop in a safe place and seek assistance if the vehicle stalls, runs very poorly, overheats, or shows another serious warning.
P1408 frequently asked questions
What does P1408 mean?
Its meaning depends on the vehicle. A generic listing gives “EGR flow out of self-test range,” while some manufacturer listings associate it with an intake manifold pressure sensor circuit.
Does P1408 mean the EGR valve has failed?
No. Even where P1408 is EGR-related, the code reports a test result, not a confirmed failed component. Diagnosis is needed to find the cause.
Can I drive with P1408?
The code alone cannot determine drivability or safety. Consider how the vehicle is running, follow the owner’s manual, and seek prompt help if there are severe symptoms.
What should I check first for P1408?
First confirm the code definition for the exact year, make, model, and engine. Then review related codes and freeze-frame data before following the vehicle-specific diagnostic procedure.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.