P1442 Code: Meaning & Diagnostic Guide
Leakage Diagnostic Pump Control Circuit Signal Low
What does P1442 mean?
- BMW: Leakage Diagnostic Pump Control Circuit Signal Low Source
- BUICK: EVAP Vacuum Switch High Voltage During Ignition On Source
- CADILLAC: EVAP Vacuum Switch High Voltage During Ignition On Source
- CHEVY: EVAP Vacuum Switch High Voltage During Ignition On Source
- CHRYSLER: EVAP Vacuum Switch High Voltage During Ignition On Source
- FORD: Secondary Air Injection System Monitor Circuit High Voltage Source
- GM: EVAP Vacuum Switch High Voltage During Ignition On Source
- GMC: EVAP Vacuum Switch High Voltage During Ignition On Source
- LINCOLN: Secondary Air Injection System Monitor Circuit High Voltage Source
- MERCURY: Secondary Air Injection System Monitor Circuit High Voltage Source
- OLDSMOBILE: EVAP Vacuum Switch High Voltage During Ignition On Source
- OTHER: Evaporative Emission Control System Leak Detected Source
- PLYMOUTH: EVAP Vacuum Switch High Voltage During Ignition On Source
- PONTIAC: EVAP Vacuum Switch High Voltage During Ignition On Source
- SATURN: EVAP Vacuum Switch High Voltage During Ignition On Source
- SUBARU: Fuel Level Sensor Circuit Range Performance Source
- VOLKSWAGEN: EGR Valve Position Sensor Signal Too High Source
P1442 quick answer
P1442 is listed generically as an evaporative-emissions (EVAP) system leak detected. Its exact meaning varies by vehicle: the supplied references also associate it with EVAP switch or pump circuit signals and, on some vehicles, a secondary-air monitor circuit. Check the vehicle-specific service information before diagnosing.
Is P1442 generic or manufacturer-specific?
P1442 currently has manufacturer-labelled reference definitions for BMW, BUICK, CADILLAC, CHEVY, CHRYSLER, FORD and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1442 works in the vehicle
The EVAP system limits fuel vapor escaping into the air. A leak-related definition means the vehicle detected a condition consistent with an EVAP leak; circuit-related definitions instead describe an electrical signal outside the expected range. The code alone does not identify a failed part.
P1442 symptoms
The warning light may be the only noticeable sign. Depending on the vehicle and the underlying condition, there may be fuel-vapor odor or other drivability symptoms, but these are not established by the code alone.
Possible causes of P1442
Possible explanations depend on the vehicle-specific definition and may include an EVAP leak, a switch or pump circuit issue, wiring or connector trouble, or a secondary-air monitor circuit condition. P1442 by itself does not confirm any of these causes.
How to diagnose P1442
- Record the vehicle year, make, model, engine, all stored codes, and any freeze-frame data.
- Look up P1442 in reliable service information for that exact vehicle to confirm which system and test the code refers to.
- If the vehicle-specific definition concerns EVAP, inspect accessible vapor-system hoses and the fuel cap for obvious damage or poor sealing.
- If the definition concerns a circuit, have the relevant wiring, connectors, and component signals checked using the vehicle's diagnostic procedure.
- Use appropriate scan-tool tests or an EVAP leak test when directed by the service information; avoid replacing parts based on the code alone.
How to fix P1442
Repair depends on the confirmed vehicle-specific cause. Address a verified leak, wiring fault, or component problem according to the service procedure, then clear and retest the code. Seek a qualified technician if diagnosis involves specialized equipment or system access.
Can I drive with P1442?
The code alone cannot determine whether continued driving is safe. If the vehicle runs normally and has no other warning signs, arrange diagnosis promptly and follow the owner's manual. Stop in a safe place and seek assistance if you notice strong fuel odor, a fuel leak, or significant drivability problems.
P1442 frequently asked questions
What does P1442 mean?
A generic listing describes P1442 as an EVAP system leak detected, but the exact definition varies by vehicle and may refer to a switch, pump, or secondary-air monitor circuit.
Does P1442 confirm an EVAP leak?
No. The generic description is leak-related, but the code does not confirm a leak or identify a failed part. Verify its meaning for the specific vehicle.
Can I keep driving with P1442?
The code alone does not establish a safety outcome. Consult the owner's manual and arrange diagnosis; respond promptly to fuel odor, visible leakage, or serious drivability symptoms.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.