P1445 Code: Meaning & Diagnostic Guide
Diagnostic Module Tank Leakage DM-TL Pump Control Circuit Signal Low
What does P1445 mean?
- BMW: Diagnostic Module Tank Leakage DM-TL Pump Control Circuit Signal Low Source
- FORD: Purge Flow Sensor Circuit Input High Source
- LINCOLN: Purge Flow Sensor Circuit Input High Source
- MAZDA: EVAP Purge Flow Sensor Circuit High Voltage Source
- MERCURY: Purge Flow Sensor Circuit Input High Source
- NISSAN: EVAP Canister Purge Volume Control Valve Source
- OTHER: Purge Flow Sensor Circuit High Input Source
- VOLKSWAGEN: Catalyst Temperature Sensor 2 Circuit Range Performance Source
P1445 quick answer
P1445 is a manufacturer-specific powertrain code. A generic listing describes it as a purge-flow sensor circuit high input, but its meaning varies by vehicle; check the code definition for your exact year, make, and model.
Is P1445 generic or manufacturer-specific?
P1445 currently has manufacturer-labelled reference definitions for BMW, FORD, LINCOLN, MAZDA, MERCURY, NISSAN and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1445 works in the vehicle
A “circuit high input” generally means the control module detected a signal voltage higher than expected. P1445 is not consistent across manufacturers: references also associate it with EVAP components, a leakage-detection pump, or a catalyst temperature sensor. The vehicle-specific service information is needed to identify what the code means in your case.
P1445 symptoms
Possible signs depend on the vehicle and the fault. The check-engine light may be the only indication; drivability or emissions symptoms are also possible, but are not established by this code alone.
Possible causes of P1445
Depending on the vehicle-specific definition, possibilities may include a sensor or component issue, wiring or connector trouble, or another fault in the relevant control circuit. P1445 alone does not confirm a failed part.
How to diagnose P1445
- Confirm the vehicle’s year, make, model, engine, and market, then verify the manufacturer-specific definition of P1445.
- Use a scan tool to record the code status, freeze-frame data, and any related codes before clearing anything.
- Follow vehicle-specific diagnostic information to inspect the identified system and its wiring and connectors.
- Test components and circuit signals using the specified procedure; avoid replacing parts based only on the code description.
- If the cause is unclear, have a qualified technician diagnose the vehicle.
How to fix P1445
The repair depends on the confirmed vehicle-specific cause. It may involve addressing a circuit, connector, or component issue, but the code alone does not identify which repair is needed. Use the correct service information or seek professional diagnosis.
Can I drive with P1445?
P1445 alone does not establish whether driving is safe or unsafe. Check the owner’s manual and consider the vehicle’s symptoms. If warning lights, poor running, or other concerning behavior occur, limit driving and arrange an inspection.
P1445 frequently asked questions
What does P1445 mean?
Its meaning varies by manufacturer. A generic reference lists a purge-flow sensor circuit high input, but the exact definition must be checked for the specific vehicle.
Does P1445 mean the purge-flow sensor has failed?
No. The code does not confirm a failed sensor. Diagnosis should verify the vehicle-specific code meaning and test the relevant circuit and components.
Can I drive with P1445?
The code alone cannot determine whether driving is safe. Use the owner’s manual and consider any symptoms; seek inspection if the vehicle runs poorly or shows other concerning signs.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.