Source-backed diagnostic reference

P1446 Code: Meaning & Diagnostic Guide

Diagnostic Module Tank Leakage DM-TL Pump Control Circuit Signal High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1446 mean?

  • BMW: Diagnostic Module Tank Leakage DM-TL Pump Control Circuit Signal High Source
  • MAZDA: Evaporative Vacuum Solenoid Circuit Source
  • NISSAN: EVAP Canister Vent Control Valve Closed Source
  • OTHER: Evaporative Vac Solenoid Circuit Malfunction Source
  • VOLKSWAGEN: Catalyst Temperature Circuit Short To Ground Source

P1446 quick answer

P1446 is a manufacturer-specific powertrain code. A generic reference describes it as an evaporative vacuum solenoid circuit malfunction, but its exact meaning varies by vehicle; check the manufacturer-specific definition for your make, model, and year.

Is P1446 generic or manufacturer-specific?

P1446 currently has manufacturer-labelled reference definitions for BMW, MAZDA, NISSAN, OTHER, VOLKSWAGEN. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1446 works in the vehicle

The EVAP system limits fuel-vapor emissions. A vacuum solenoid is an electrically controlled valve, and a circuit malfunction means the control system detected an unexpected electrical condition. The supplied references show other P1446 definitions too, including a tank-leak diagnostic pump signal, a canister vent valve, and a catalyst-temperature circuit. These descriptions are not interchangeable.

P1446 symptoms

The check-engine light may be the only noticeable sign. Depending on the vehicle and the underlying issue, other symptoms may occur, but none are established by the code alone.

Possible causes of P1446

Possible explanations depend on the vehicle-specific definition and may include a solenoid or valve problem, damaged wiring or connectors, or a control-circuit issue. P1446 alone does not confirm a failed component.

How to diagnose P1446

  1. Confirm the vehicle's make, model, year, engine, and market, then look up the manufacturer-specific meaning of P1446.
  2. Scan for other stored codes and review available freeze-frame data, which records conditions when the code was set.
  3. Use the vehicle's service information to inspect the relevant circuit, wiring, connectors, and components for damage or poor connections.
  4. Have a qualified technician perform any required circuit tests and verify the repair with a follow-up scan.

How to fix P1446

Do not replace a part based on the code alone. The correct repair depends on the vehicle-specific definition and test results; consult a qualified technician if diagnosis requires electrical testing.

Can I drive with P1446?

The code alone does not determine whether the vehicle is safe to drive. Check the owner's manual and arrange diagnosis; stop driving and seek assistance if the vehicle develops serious drivability problems or other urgent warning signs.

P1446 frequently asked questions

Does P1446 mean the same thing on every vehicle?

No. P1446 is manufacturer-specific, and the supplied references list several different definitions. Confirm the meaning for your exact vehicle.

Does P1446 prove that an EVAP solenoid has failed?

No. The generic reference points to an evaporative vacuum solenoid circuit malfunction, but the code does not identify a confirmed failed part.

Can I drive with P1446?

The code by itself cannot establish whether driving is safe. Consider the vehicle's behavior, consult the owner's manual, and have the fault diagnosed.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.