Source-backed diagnostic reference

P1473 Code: Meaning & Diagnostic Guide

Diagnostic Module Tank Leakage DM-TL Pump Current Plausibility

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1473 mean?

  • BMW: Diagnostic Module Tank Leakage DM-TL Pump Current Plausibility Source
  • FORD: Fan Secondary High with Fans Off Source
  • LINCOLN: Fan Secondary High with Fans Off Source
  • MERCURY: Fan Secondary High with Fans Off Source
  • OTHER: Fan Secondary High With Fan(s) Off Source
  • VOLKSWAGEN: EVAP Emission Control System LDP Open Circuit Source

P1473 quick answer

P1473 does not have one universal meaning. Its interpretation depends on the vehicle manufacturer, so confirm the vehicle details and look up the code in manufacturer-specific service information before diagnosing it.

Is P1473 generic or manufacturer-specific?

P1473 currently has manufacturer-labelled reference definitions for BMW, FORD, LINCOLN, MERCURY, OTHER, VOLKSWAGEN. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1473 works in the vehicle

P1473 is a powertrain diagnostic trouble code. The supplied references associate it with different systems: a fuel-tank leak-detection pump current plausibility check for BMW, a fan-secondary circuit reading high while the fan is off for Ford, Lincoln, and Mercury, and an EVAP leak-detection-pump open circuit for Volkswagen. These descriptions are not interchangeable.

P1473 symptoms

Symptoms depend on the vehicle and the system involved. Possible signs could relate to cooling fans or emissions-system monitoring, but some vehicles may show only a warning light. The code alone does not establish which symptoms are present.

Possible causes of P1473

Possible causes vary with the vehicle-specific definition and may involve wiring, electrical connections, or the monitored component or circuit. P1473 alone does not confirm a failed part.

How to diagnose P1473

  1. Confirm the vehicle's make, model, year, engine, and market.
  2. Use a scan tool to record P1473 and any other stored codes, along with available freeze-frame data.
  3. Check manufacturer-specific service information to identify what P1473 monitors on this vehicle.
  4. Follow the applicable diagnostic procedure, including checks of related wiring and connectors where specified.
  5. Verify any repair using the recommended scan-tool checks and a follow-up scan.

How to fix P1473

The correct repair depends on the vehicle-specific diagnosis. Avoid replacing a pump, fan, or other component based on the code description alone; have the relevant circuit and components tested using the correct service procedure.

Can I drive with P1473?

The code by itself does not determine whether the vehicle is safe to drive. If there are overheating signs, abnormal fan operation, reduced performance, or other serious symptoms, stop when safe and seek professional help. Otherwise, arrange diagnosis promptly and follow the vehicle's warning messages and owner's manual.

P1473 frequently asked questions

What does P1473 mean?

Its meaning varies by manufacturer. The supplied references link it to different fan, fuel-tank leak-detection, and EVAP-related descriptions.

Does P1473 identify a failed component?

No. It reports a detected condition, and the code alone does not confirm that any particular component has failed.

Can I diagnose P1473 without vehicle details?

Not reliably. Confirm the make, model, year, and engine, then use the matching manufacturer-specific diagnostic information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.