Source-backed diagnostic reference

P147D Code: Meaning & Diagnostic Guide

BMW’s SAE P-code list identifies P147D as “EVAP System Leak Detection Module Circuit/Open.” The listing defines the code but does not associate it with a 2021+ BEV or PHEV; the EVAP description alone does not establish or rule out PHEV applicability.

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P147D mean?

  • GENERIC: BMW’s SAE P-code list identifies P147D as “EVAP System Leak Detection Module Circuit/Open.” The listing defines the code but does not associate it with a 2021+ BEV or PHEV; the EVAP description alone does not establish or rule out PHEV applicability. Source

P147D quick answer

P147D is defined as “EVAP System Leak Detection Module Circuit/Open.” It indicates an open-circuit condition in the circuit named by the code; it does not by itself confirm which part has failed.

Is P147D generic or manufacturer-specific?

P147D has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P147D works in the vehicle

An open circuit means electrical continuity may be interrupted. The code definition does not establish whether it applies to a particular vehicle, including a 2021-or-newer BEV or PHEV. Check the vehicle-specific service information before interpreting it.

P147D symptoms

The code alone does not establish what symptoms, if any, the vehicle will have. A warning indicator may be present, but symptoms and their cause need to be verified on the vehicle.

Possible causes of P147D

Possibilities consistent with an open-circuit code include an interrupted connection or a wiring or circuit-component fault. P147D alone does not identify a failed component or confirm an EVAP leak.

How to diagnose P147D

  1. Confirm the exact code and record any other codes and available scan-tool data.
  2. Check that P147D is listed for the specific year, make, model, and powertrain in vehicle-specific service information.
  3. Have a qualified technician inspect the relevant circuit and connections using the manufacturer’s diagnostic procedure.
  4. Use test results to identify the fault before replacing parts or clearing the code.

How to fix P147D

Repair should follow the confirmed diagnosis and vehicle-specific procedures. Do not replace a leak-detection module or other component based only on the code. High-voltage work, if relevant to the vehicle, should be left to properly qualified personnel.

Can I drive with P147D?

P147D alone does not establish whether a vehicle is safe or unsafe to drive. Arrange diagnosis, and follow the owner’s manual or seek assistance if warning messages, drivability changes, or other concerning symptoms occur.

P147D frequently asked questions

What does P147D mean?

It is defined as “EVAP System Leak Detection Module Circuit/Open,” describing an open-circuit condition in the named circuit.

Does P147D prove the leak-detection module has failed?

No. The code identifies a circuit condition, not a confirmed failed component. Diagnosis is needed to locate the fault.

Does this code confirm an EVAP system leak?

No. Its supplied definition refers to a circuit/open condition and does not confirm a physical EVAP leak.

Does P147D apply to every vehicle or powertrain?

Not necessarily. The reference defines the code but does not establish applicability to a specific vehicle or to 2021-or-newer BEVs or PHEVs. Verify it against vehicle-specific service information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.