Source-backed diagnostic reference

P1495 Code: Meaning & Diagnostic Guide

Leak Detection Pump Solenoid Circuit Open Or Shorted

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1495 mean?

  • DODGE: Leak Detection Pump Solenoid Circuit Open Or Shorted Source
  • JEEP: Leak Detection Pump Solenoid Circuit Open Or Shorted Source
  • MITSUBISHI: EVAP Ventilation Solenoid Circuit Fault Source
  • OTHER: TCSPL Solenoid Circuit Malfunction Source
  • PLYMOUTH: Leak Detection Pump Solenoid Circuit Open Or Shorted Source
  • PONTIAC: Leak Detection Pump Solenoid Circuit Open Or Shorted Source

P1495 quick answer

P1495 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. In the supplied references, it commonly points to a leak-detection-pump solenoid circuit issue for Dodge, Jeep, Plymouth, and Pontiac; Mitsubishi lists an EVAP ventilation-solenoid circuit fault. Confirm the definition for your vehicle before diagnosing it.

Is P1495 generic or manufacturer-specific?

P1495 currently has manufacturer-labelled reference definitions for DODGE, JEEP, MITSUBISHI, OTHER, PLYMOUTH, PONTIAC. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1495 works in the vehicle

A circuit fault means the control module detected an electrical condition outside its expected range. Depending on the vehicle, P1495 may refer to an evaporative-emissions-system solenoid circuit or another manufacturer-specific solenoid circuit. The code alone does not identify a failed part.

P1495 symptoms

The check-engine light may be the only noticeable sign. Depending on the vehicle and the underlying fault, other drivability or emissions symptoms may occur, but they are not established by this code alone.

Possible causes of P1495

Possible causes depend on the vehicle-specific definition and may include damaged wiring or connectors, a poor electrical connection, or a faulty solenoid or related control circuit. Further testing is needed to identify the cause.

How to diagnose P1495

  1. Check the vehicle’s make, model, year, engine, and service information to verify the correct definition of P1495.
  2. Use a scan tool to record the code and any accompanying codes or available freeze-frame data before clearing anything.
  3. Inspect the relevant solenoid’s wiring and connectors for visible damage, corrosion, looseness, or disconnection.
  4. Have the circuit and component tested using the vehicle’s service procedure; do not replace parts based on the code alone.
  5. After any repair, clear the code if appropriate and confirm whether it returns under the specified test conditions.

How to fix P1495

The appropriate repair depends on the vehicle-specific diagnosis. It may involve repairing a wiring or connection problem or replacing a confirmed faulty component. Consult the correct service information or a qualified technician; P1495 by itself does not confirm which part has failed.

Can I drive with P1495?

The code alone does not establish whether the vehicle is safe to drive. If it runs normally, arrange diagnosis soon and follow the vehicle’s owner guidance. Stop in a safe place and seek assistance if you notice severe drivability problems, warning lights indicating an urgent issue, or fuel leakage or a strong fuel odor.

P1495 frequently asked questions

What does P1495 mean?

Its meaning varies by manufacturer. The supplied references associate it with a leak-detection-pump solenoid circuit fault on some makes and an EVAP ventilation-solenoid circuit fault for Mitsubishi.

Does P1495 prove the solenoid has failed?

No. It indicates a detected circuit fault, not a confirmed failed component. Wiring, connectors, and the relevant circuit also need to be checked.

Can I diagnose P1495 without knowing the vehicle details?

Not reliably. Confirm the vehicle’s make, model, year, and engine, then use its manufacturer-specific code definition and diagnostic procedure.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.