Source-backed diagnostic reference

P1506 Code: Meaning & Diagnostic Guide

Idle Speed Control Valve Open Solenoid Control Circuit Signal High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1506 mean?

  • BMW: Idle Speed Control Valve Open Solenoid Control Circuit Signal High Source
  • FORD: Idle Air Control Over Speed Error Source
  • KIA: Idle Air Control Valve Opening Coil Voltage High Source
  • LINCOLN: Idle Air Control Over Speed Error Source
  • MERCURY: Idle Air Control Over Speed Error Source
  • OTHER: Idle Air Control Overspeed Error Source
  • VOLKSWAGEN: Closed Throttle Position Switch Does Not Open Short To Ground Source

P1506 quick answer

P1506 is a manufacturer-specific powertrain code, so its exact meaning depends on the vehicle. Reference definitions include an idle-air-control overspeed error, a high control-circuit signal, or a closed-throttle switch fault. Check the vehicle-specific service information before diagnosing it.

Is P1506 generic or manufacturer-specific?

P1506 currently has manufacturer-labelled reference definitions for BMW, FORD, KIA, LINCOLN, MERCURY, OTHER and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1506 works in the vehicle

Idle-air control regulates airflow when the engine is idling. An overspeed error means engine idle speed may be higher than the control system expects; a high circuit signal means an electrical reading is above the expected range. Some listings assign P1506 a different throttle-switch meaning, so the code alone does not identify a failed part.

P1506 symptoms

Depending on the vehicle and the reason the code was set, possible signs include an unusually high or unstable idle, stalling, or an illuminated check-engine light. Some vehicles may show no obvious symptoms.

Possible causes of P1506

Possible explanations vary by vehicle and may involve an idle-air-control system or its wiring, an unexpected air leak, or a throttle-position switch or signal issue. These are diagnostic possibilities, not confirmed causes.

How to diagnose P1506

  1. Confirm the vehicle’s year, make, model, engine, and the manufacturer-specific definition of P1506.
  2. Scan for other codes and review any available freeze-frame data, which records engine conditions when the fault was detected.
  3. Check for visible intake or wiring damage and verify that connectors are seated; avoid replacing parts based on the code alone.
  4. Use the vehicle’s service information to test the relevant idle-control or throttle-switch circuit and compare readings with specifications.
  5. After repairs, clear the code if appropriate and confirm whether it returns during a suitable road or idle test.

How to fix P1506

The correct repair depends on the vehicle-specific diagnosis. A technician may need to address wiring, an air leak, or a control-system component, but P1506 by itself does not confirm which part has failed. Follow the manufacturer’s service procedure.

Can I drive with P1506?

Driving impact depends on symptoms. If the engine idles erratically, stalls, or responds unpredictably, limit driving and arrange an inspection. If there are no noticeable symptoms, have the code checked soon and follow the vehicle manual; this code alone does not establish a universal safety conclusion.

P1506 frequently asked questions

Does P1506 always mean the idle-air-control valve is faulty?

No. P1506 has different definitions across manufacturers, and even an idle-control definition does not prove the valve itself has failed.

Can P1506 cause a high idle?

It may be associated with a high or unstable idle on some vehicles, but symptoms depend on the vehicle and the underlying fault.

What should I check first for P1506?

First confirm the code definition for your exact vehicle, then review related codes and inspect the relevant intake and electrical connections before testing components.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.