P1512 Code: Meaning & Diagnostic Guide
DISA Control Circuit Signal Low
What does P1512 mean?
- BMW: DISA Control Circuit Signal Low Source
- FORD: Intake Manifold Runner Control Stuck Closed Source
- LINCOLN: Intake Manifold Runner Control Stuck Closed Source
- MERCURY: Intake Manifold Runner Control Stuck Closed Source
- OTHER: Intake Manifold Runner Control (Bank 1) Stuck Closed Source
- SUBARU: Idle Air Control Solenoid Signal 2 Circuit Low Input Source
- TOYOTA: Boost Pressure High Source
- VOLKSWAGEN: Intake Manifold Changeover Valve Circuit Short To B+ Source
P1512 quick answer
P1512 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. A generic listing describes it as an intake manifold runner control on Bank 1 stuck closed, but other listings assign different meanings. Check the code against the vehicle’s make, model, year, and engine before diagnosing it.
Is P1512 generic or manufacturer-specific?
P1512 currently has manufacturer-labelled reference definitions for BMW, FORD, LINCOLN, MERCURY, OTHER, SUBARU and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1512 works in the vehicle
An intake manifold runner system changes airflow through the engine’s intake manifold. “Stuck closed” means the control system may be reporting that a runner is not opening as expected. However, P1512 can also refer to other systems on some vehicles, so the generic description is not a confirmed diagnosis for every vehicle.
P1512 symptoms
Depending on the vehicle and the system involved, a P1512 may occur with reduced engine performance, rough running, an illuminated check-engine light, or no obvious symptoms. These are possibilities, not symptoms established by the code alone.
Possible causes of P1512
If the vehicle-specific definition concerns an intake manifold runner, possible causes may include a sticking runner mechanism, a control or wiring issue, or a problem with the actuator or its control circuit. Other vehicle-specific definitions may point to an entirely different system. The code alone does not confirm a failed part.
How to diagnose P1512
- Confirm the vehicle’s make, model, year, engine, and market, then look up the manufacturer-specific definition of P1512.
- Use a compatible scan tool to record the code and any related codes or available freeze-frame information before clearing anything.
- Follow vehicle-specific service information to inspect the relevant system and its accessible wiring and connectors for visible damage or loose connections.
- Have a qualified technician perform the appropriate circuit and component tests before replacing parts.
How to fix P1512
The correct repair depends on the vehicle-specific definition and test results. Address the identified wiring, control, or mechanical issue only after diagnosis; do not replace an intake component based solely on a generic code description.
Can I drive with P1512?
The code alone cannot determine whether the vehicle is safe to drive. If the engine runs poorly, loses power, or shows other concerning changes, avoid continued driving and arrange an inspection. If there are no symptoms, consult vehicle-specific guidance and have the code checked promptly.
P1512 frequently asked questions
What does P1512 mean?
Its meaning varies by manufacturer. A generic listing describes an intake manifold runner control on Bank 1 stuck closed, but some vehicles use P1512 for a different system.
Does P1512 confirm a bad intake manifold runner?
No. The code does not confirm a failed component, and the intake-runner definition may not apply to your vehicle. Confirm the vehicle-specific code description and diagnose the system.
Can I keep driving with P1512?
The code alone does not establish driveability or safety. Consider the vehicle’s symptoms, consult vehicle-specific guidance, and arrange diagnosis—especially if performance or engine operation has changed.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.