P1595 Code: Meaning & Diagnostic Guide
Speed Control Solenoid Circuit Open Or Shorted
What does P1595 mean?
- DODGE: Speed Control Solenoid Circuit Open Or Shorted Source
- JEEP: Speed Control Solenoid Circuit Open Or Shorted Source
- PLYMOUTH: Speed Control Solenoid Circuit Open Or Shorted Source
- PONTIAC: Speed Control Solenoid Circuit Open Or Shorted Source
- SUBARU: Automatic Transmission Diagnosis Input Signal Circuit Low Input Source
P1595 quick answer
P1595 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. In the supplied references, it indicates an open or shorted speed-control solenoid circuit for Dodge, Jeep, Plymouth, and Pontiac; for Subaru, it indicates a low automatic-transmission diagnosis input signal.
Is P1595 generic or manufacturer-specific?
P1595 currently has manufacturer-labelled reference definitions for DODGE, JEEP, PLYMOUTH, PONTIAC, SUBARU. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1595 works in the vehicle
An open circuit means electrical continuity may be interrupted; a short means current may be taking an unintended path. A low input signal means the control system is detecting a signal below its expected level. P1595 is not defined identically across all manufacturers, so confirm the description for the vehicle’s make, model, year, and engine before diagnosing it.
P1595 symptoms
Possible symptoms depend on the vehicle and which definition applies. If the speed-control circuit meaning applies, cruise control may not work or may be disabled. If the Subaru transmission-signal meaning applies, a transmission-related warning or operating change may occur. The code alone does not confirm any symptom or failed part.
Possible causes of P1595
Depending on the vehicle-specific definition, possibilities include an interrupted or shorted speed-control solenoid circuit, a wiring or connector problem, or a low transmission diagnosis input signal. These are diagnostic possibilities, not confirmed causes; the code alone does not identify a failed component.
How to diagnose P1595
- Confirm the exact P1595 description using vehicle-specific service information for the make, model, year, and engine.
- Record other stored codes and relevant symptoms before clearing codes.
- Inspect accessible wiring and connectors related to the applicable circuit for visible damage, looseness, or corrosion.
- Use the manufacturer’s diagnostic procedure and suitable scan-tool or electrical tests to check the circuit or input signal.
- If the cause is unclear, have a qualified technician diagnose the vehicle before replacing parts.
How to fix P1595
Repair should follow the confirmed vehicle-specific diagnosis. A wiring or connector repair may be appropriate if testing identifies a circuit fault; do not replace a solenoid or other component based only on P1595. Avoid high-voltage work and consult a qualified technician when testing requires specialized procedures.
Can I drive with P1595?
Driving impact cannot be determined from P1595 alone. If cruise control is affected, do not rely on it until the issue is diagnosed. If the vehicle shows abnormal shifting, warning lights, reduced performance, or other concerning behavior, stop when safe and seek professional advice.
P1595 frequently asked questions
What does P1595 mean?
Its meaning varies by manufacturer. The supplied references associate it with a speed-control solenoid circuit open or short for Dodge, Jeep, Plymouth, and Pontiac, and with a low automatic-transmission diagnosis input signal for Subaru.
Does P1595 identify a failed part?
No. It reports a detected circuit or signal condition, and further vehicle-specific testing is needed to find the cause.
Can I keep driving with P1595?
The code alone does not establish whether driving is safe. Consider the vehicle’s behavior and warnings; get prompt professional help if shifting or performance is abnormal.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.