Source-backed diagnostic reference

P1696 Code: Meaning & Diagnostic Guide

Traction Control Fuel Cut Signal Low Input

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1696 mean?

  • ACURA: Traction Control Fuel Cut Signal Low Input Source
  • BUICK: Remote Keyless Entry Voltage High Source
  • CADILLAC: Remote Keyless Entry Voltage High Source
  • CHEVY: Remote Keyless Entry Voltage High Source
  • CHRYSLER: PCM Failure EEPROM Write Denied Source
  • DODGE: PCM Failure EEPROM Write Denied Source
  • GM: Remote Keyless Entry Voltage High Source
  • GMC: Remote Keyless Entry Voltage High Source
  • HONDA: Traction Control Fuel Cut Signal Low Input Source
  • INFINITI: Traction Control Fuel Cut Signal Low Input Source
  • JAGUAR: CAN Link Engine Control Module Cruise Control Module Circuit Network Source
  • JEEP: PCM Failure EEPROM Write Denied Source
  • MITSUBISHI: PCM Failure EEPROM Write Denied Source
  • PLYMOUTH: PCM Failure EEPROM Write Denied Source
  • PONTIAC: PCM Failure EEPROM Write Denied Source
  • SATURN: Remote Keyless Entry Voltage High Source

P1696 quick answer

P1696 is a manufacturer-specific powertrain code, so its meaning depends on the vehicle. The supplied references associate it with several different systems; confirm the definition for the exact make, model, year, and engine before diagnosing or replacing parts.

Is P1696 generic or manufacturer-specific?

P1696 currently has manufacturer-labelled reference definitions for ACURA, BUICK, CADILLAC, CHEVY, CHRYSLER, DODGE and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1696 works in the vehicle

The code does not identify one universal fault. Reference descriptions include a low traction-control fuel-cut signal, high remote-keyless-entry voltage, a denied PCM memory write, and a cruise-control/engine-module network circuit. A scan tool’s vehicle-specific description and service information are needed to tell which meaning applies.

P1696 symptoms

Symptoms depend on the vehicle-specific definition and may be absent. Depending on the affected system, a driver might notice a warning light, traction-control or cruise-control changes, keyless-entry issues, or other drivability or electrical symptoms. These are possibilities, not confirmed effects of P1696 on every vehicle.

Possible causes of P1696

Possible causes vary with the applicable definition and may involve wiring or connectors, a signal or voltage issue, module communication, or a control-module memory operation. The code alone does not confirm a failed component or prove that the PCM needs replacement.

How to diagnose P1696

  1. Record the vehicle’s make, model, year, engine, and all stored codes, including freeze-frame data.
  2. Use a scan tool or reliable service information to look up the exact P1696 definition for that vehicle.
  3. Check for related codes and note any warning lights or symptoms that appeared with the code.
  4. Inspect relevant accessible wiring and connectors for visible damage, corrosion, or loose connections, guided by the vehicle-specific definition.
  5. Follow the manufacturer’s diagnostic procedure and use suitable test equipment; seek a qualified technician if module programming or specialized electrical diagnosis is required.

How to fix P1696

Base repairs on the vehicle-specific test results, not the code number alone. Depending on the diagnosis, a repair could involve a connection, wiring, circuit, or module-related procedure. Do not replace or reprogram a control module without confirming the fault and following the correct service procedure.

Can I drive with P1696?

Driving advice depends on the vehicle’s symptoms and which system the code refers to. If the vehicle runs and handles normally, arrange diagnosis promptly and monitor for changes. If it loses power, behaves unpredictably, or shows a serious warning, stop somewhere safe and seek professional assistance.

P1696 frequently asked questions

What does P1696 mean?

It has different meanings across vehicle manufacturers. Check the vehicle-specific code definition before interpreting it.

Does P1696 mean the PCM has failed?

No. Some references describe a PCM memory-write issue, but the code alone does not confirm PCM failure.

Can I keep driving with P1696?

That depends on the vehicle-specific fault and symptoms. Seek diagnosis promptly, and stop driving if the vehicle loses power or behaves unpredictably.

What information is needed to diagnose P1696?

The vehicle’s make, model, year, and engine, plus the exact scan-tool description, related codes, and any symptoms.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.