P1698 Code: Meaning & Diagnostic Guide
No CCD Messages Received From PCM
What does P1698 mean?
- CHRYSLER: No CCD Messages Received From PCM Source
- DODGE: No CCD Messages Received From PCM Source
- JEEP: No CCD Messages Received From PCM Source
- MITSUBISHI: No CCD Messages From TCM Source
- PLYMOUTH: No CCD Messages Received From PCM Source
- PONTIAC: No CCD Messages Received From PCM Source
- SUBARU: Engine Torque Control Cut Signal Circuit Low Input Source
P1698 quick answer
P1698 is a manufacturer-specific code, so its meaning depends on the vehicle. In the supplied references, it can indicate missing CCD messages from the PCM or TCM, or a low-input torque-control signal circuit. Check the definition for your exact vehicle before drawing conclusions.
Is P1698 generic or manufacturer-specific?
P1698 currently has manufacturer-labelled reference definitions for CHRYSLER, DODGE, JEEP, MITSUBISHI, PLYMOUTH, PONTIAC and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1698 works in the vehicle
A diagnostic trouble code (DTC) is a code stored when a vehicle detects a condition outside expected operation. For several listed makes, P1698 means the control module is not receiving expected CCD network messages from the powertrain control module (PCM). Another listed definition refers to missing messages from the transmission control module (TCM); the Subaru entry describes a low torque-control cut signal circuit input. These descriptions are not interchangeable, and the code alone does not identify a failed part.
P1698 symptoms
Depending on the vehicle and the underlying condition, there may be no obvious symptoms, or the driver may notice warning lights, drivability changes, or transmission-related concerns. These are possibilities, not symptoms established by the code reference.
Possible causes of P1698
Depending on the vehicle-specific definition, possible areas to investigate may include communication wiring or connections, module power or ground, or the signal circuit identified by the applicable service information. P1698 alone does not confirm that a control module or any other component has failed.
How to diagnose P1698
- Confirm the vehicle's year, make, model, engine, and transmission, then look up the manufacturer-specific P1698 definition.
- Use a compatible scan tool to record all stored codes and available freeze-frame data before clearing anything.
- Check for related codes and follow the vehicle's service information for the applicable communication or signal-circuit diagnosis.
- Have wiring, connectors, and module power and ground checked using the correct service procedure; avoid replacing parts based on P1698 alone.
- If diagnosis requires specialized equipment or access to control-module circuits, consult a qualified technician.
How to fix P1698
The correct repair depends on the vehicle-specific meaning and test results. A technician may need to inspect the relevant circuit, connections, or module power and ground, then verify the repair by rescanning the vehicle. Do not assume the PCM, TCM, or another component is faulty based only on this code.
Can I drive with P1698?
The code reference does not establish a universal safety conclusion. If the vehicle has serious drivability or transmission problems, warning messages, or unpredictable operation, stop in a safe place and seek professional advice. If it drives normally, arrange diagnosis promptly and follow the owner's manual.
P1698 frequently asked questions
Does P1698 have the same meaning on every vehicle?
No. The supplied references give different definitions by manufacturer. Confirm the meaning using service information for the exact vehicle.
Does P1698 prove that the PCM or TCM has failed?
No. A missing-message description indicates a communication condition, not a confirmed failed module. Testing is needed to identify the cause.
Can I keep driving with P1698?
The code alone cannot determine whether driving is safe. Consider how the vehicle behaves, follow the owner's manual, and get professional advice if operation is abnormal.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.