P1705 Code: Meaning & Diagnostic Guide
TCM A/T Gear Position Switch Circuit Shorted
What does P1705 mean?
- ACURA: TCM A/T Gear Position Switch Circuit Shorted Source
- BUICK: P/N Signal Output Circuit Source
- CADILLAC: P/N Signal Output Circuit Source
- CHEVY: P/N Signal Output Circuit Source
- FORD: Manual Lever Position Sensor Out of Self-Test Range Source
- GM: P/N Signal Output Circuit Source
- GMC: P/N Signal Output Circuit Source
- HONDA: TCM A/T Gear Position Switch Circuit Shorted Source
- INFINITI: TCM A/T Gear Position Switch Circuit Shorted Source
- LEXUS: Direct Clutch Speed Circuit Fault Source
- LINCOLN: Manual Lever Position Sensor Out of Self-Test Range Source
- MAZDA: Transmission Range Sensor Out Of Self Test Range Source
- MERCEDES: Starter Lock-Out Backup Lamp Switch S161 Source
- MERCURY: Manual Lever Position Sensor Out of Self-Test Range Source
- NISSAN: Throttle Position Sensor Circuit AT Source
- OLDSMOBILE: P/N Signal Output Circuit Source
- OTHER: Not in P or N During KOEO / KOER Source
- SATURN: P/N Signal Output Circuit Source
- SUBARU: 2-4 Brake Pressure Solenoid Valve Solenoid D Circuit Source
- SUZUKI: TCM ECT Sensor Circuit Fault Source
- TOYOTA: Direct Clutch Speed Circuit Fault Source
P1705 quick answer
P1705 is a manufacturer-specific powertrain code. Its meaning varies by vehicle; it may relate to transmission gear or range-position signals, a Park/Neutral signal, or another manufacturer-defined circuit. Check the code description for your vehicle before assuming a part has failed.
Is P1705 generic or manufacturer-specific?
P1705 currently has manufacturer-labelled reference definitions for ACURA, BUICK, CADILLAC, CHEVY, FORD, GM and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1705 works in the vehicle
The supplied definitions differ among manufacturers, so P1705 does not identify one universal fault. Depending on the vehicle, it may describe a transmission control module gear-position switch circuit, a Park/Neutral signal output, a lever or range-position sensor reading outside a self-test range, or another circuit. The exact meaning should be confirmed using vehicle-specific service information.
P1705 symptoms
Some vehicles may show a warning light, have difficulty starting in Park or Neutral, or experience gear-selection or shifting concerns. Other vehicles may show no obvious symptoms. These are possibilities, not symptoms established by the code alone.
Possible causes of P1705
Depending on the vehicle-specific definition, possibilities may include an incorrect or inconsistent position signal, an electrical connection or wiring issue, or a sensor or switch concern. P1705 alone does not confirm a failed component.
How to diagnose P1705
- Identify the vehicle's year, make, model, engine, and transmission, then look up the exact P1705 definition in reliable vehicle-specific service information.
- Use a scan tool to record P1705 and any other stored codes and available freeze-frame data before clearing anything.
- Check whether the reported gear or range position agrees with the selector position, if the scan tool supports this data.
- Following the vehicle-specific diagnostic procedure, inspect relevant accessible wiring and connectors for visible damage, looseness, or corrosion.
- Have a qualified technician perform any required electrical tests and confirm the fault before replacing parts.
How to fix P1705
The repair depends on the vehicle-specific definition and test results. A qualified technician can determine whether the issue involves a signal, wiring or connection, or a component. Do not replace a sensor or switch based on P1705 alone.
Can I drive with P1705?
Driving risk cannot be determined from P1705 alone. If the vehicle has trouble selecting gears, starting in the expected selector position, or shifting normally, avoid driving it until it is assessed. If it operates normally, arrange diagnosis promptly and follow the vehicle owner's manual.
P1705 frequently asked questions
What does P1705 mean?
It is a manufacturer-specific powertrain code whose exact definition varies by vehicle. It can refer to different transmission or related signal circuits, so verify the description for your vehicle.
Does P1705 mean a transmission sensor has failed?
No. The code alone does not confirm a failed sensor or any other component. Diagnosis should follow the vehicle-specific definition and test procedure.
Can I drive with P1705?
It depends on the vehicle and its behavior. Gear-selection, starting, or shifting problems warrant avoiding driving until the vehicle is assessed; consult the owner's manual and arrange diagnosis.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.