Source-backed diagnostic reference

P1718 Code: Meaning & Diagnostic Guide

TFT Sensor In Range Failure High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1718 mean?

  • FORD: TFT Sensor In Range Failure High Source
  • LINCOLN: TFT Sensor In Range Failure High Source
  • MAZDA: Transmission Fluid Temperature Sensor Circuit Source
  • MERCURY: TFT Sensor In Range Failure High Source
  • OTHER: TFT Sensor In Range Failure High Source

P1718 quick answer

P1718 commonly refers to a transmission fluid temperature (TFT) sensor signal that the vehicle’s control system interprets as high while still within its expected range. The exact meaning can vary by vehicle; the code alone does not confirm a failed sensor.

Is P1718 generic or manufacturer-specific?

P1718 currently has manufacturer-labelled reference definitions for FORD, LINCOLN, MAZDA, MERCURY, OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1718 works in the vehicle

The TFT sensor reports transmission fluid temperature to the vehicle’s control system. P1718 is listed as “TFT Sensor In Range Failure High” in some references, while another listing describes it more generally as a transmission fluid temperature sensor circuit code. Check the definition for the specific vehicle before diagnosing.

P1718 symptoms

Some vehicles may show a warning light, display an unusual transmission temperature reading, or have changes in shifting. Others may have no obvious symptoms. These are possibilities, not symptoms established by the code itself.

Possible causes of P1718

Possible causes include an inaccurate TFT sensor reading, a problem with its wiring or connector, or an issue in the related circuit. P1718 alone does not identify which part, if any, has failed.

How to diagnose P1718

  1. Confirm the code definition using the vehicle’s year, make, model, engine, and service information.
  2. Use a compatible scan tool to record P1718, any related codes, and available transmission temperature data.
  3. Compare the reported temperature with the vehicle’s service specifications and operating conditions.
  4. Inspect the relevant wiring and connectors for visible damage, looseness, or corrosion, following vehicle-specific service procedures.
  5. Have a qualified technician test the sensor circuit and components before deciding what to replace.

How to fix P1718

The appropriate repair depends on testing and vehicle-specific information. A sensor, wiring, connector, or another circuit issue may need attention; do not replace parts based on the code alone. Avoid high-voltage work and use a qualified technician for procedures requiring specialized training.

Can I drive with P1718?

The code alone cannot determine whether the vehicle is safe to drive. If the vehicle has abnormal shifting, an overheating warning, or other concerning behavior, stop when safe and seek professional advice. If there are no symptoms, arrange diagnosis promptly and follow the owner’s manual.

P1718 frequently asked questions

What does P1718 mean?

It commonly indicates that the transmission fluid temperature sensor signal is being interpreted as high within its expected range, though the exact definition varies by vehicle.

Does P1718 mean the temperature sensor is bad?

No. The code does not confirm a failed sensor; wiring, connectors, or other circuit conditions may also need to be checked.

Can I keep driving with P1718?

It depends on the vehicle and symptoms. Abnormal shifting or an overheating warning warrants stopping when safe and getting professional advice.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.