P1847 Code: Meaning & Diagnostic Guide
2-3 Shift Solenoid Circuit High Voltage
What does P1847 mean?
- BUICK: 2-3 Shift Solenoid Circuit High Voltage Source
- CADILLAC: 2-3 Shift Solenoid Circuit High Voltage Source
- CHEVY: 2-3 Shift Solenoid Circuit High Voltage Source
- GM: 2 3 Shift Solenoid Circuit High Voltage Source
- GMC: 2 3 Shift Solenoid Circuit High Voltage Source
- OLDSMOBILE: 2-3 Shift Solenoid Circuit High Voltage Source
- OTHER: Transmission Transfer Case Contact Plate 'A' Open Circuit Source
- SATURN: 2-3 Shift Solenoid Circuit High Voltage Source
- VOLKSWAGEN: Check DTC Memory Of Brake System ECU Source
P1847 quick answer
P1847 is a manufacturer-dependent powertrain diagnostic trouble code. Depending on the vehicle, it may refer to a 2-3 shift-solenoid circuit reading high, an open transfer-case contact-plate circuit, or a brake-system ECU memory check. Confirm the definition for your vehicle before diagnosing.
Is P1847 generic or manufacturer-specific?
P1847 currently has manufacturer-labelled reference definitions for BUICK, CADILLAC, CHEVY, GM, GMC, OLDSMOBILE and others. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P1847 works in the vehicle
A diagnostic trouble code (DTC) records information detected by a vehicle control module. The supplied references do not establish one universal meaning for P1847: several list a 2-3 shift-solenoid circuit high-voltage condition, while other entries give different definitions. “Circuit high” generally means the module detected a voltage above its expected range; it does not by itself prove that a solenoid has failed.
P1847 symptoms
Symptoms depend on the vehicle and the module reporting the code. If the applicable definition concerns transmission shifting, possible signs include harsh, delayed, or unusual shifts, or a warning light. Some vehicles may show no obvious symptoms. These signs alone do not confirm P1847 as the cause.
Possible causes of P1847
For a confirmed shift-solenoid circuit interpretation, possibilities can include damaged wiring or connectors, a solenoid fault, or a control-module or circuit issue. Other vehicle-specific definitions require different diagnostic paths. The code alone does not identify a failed component.
How to diagnose P1847
- Confirm the vehicle’s year, make, model, engine, and transmission, then look up P1847 in service information for that exact vehicle.
- Use a suitable scan tool to identify which module stored the code and record related codes and available freeze-frame data.
- Follow the vehicle-specific diagnostic procedure; if the code refers to a circuit, check its wiring and connectors for visible damage or poor connections.
- Use the specified tests and limits in service information to isolate the fault before replacing parts.
- Clear the code only after repairs or testing, then verify whether it returns under the conditions described by the service procedure.
How to fix P1847
The correct repair depends on the confirmed code definition and test results. A wiring or connector repair, component replacement, or further module-level diagnosis may be appropriate, but P1847 alone does not justify replacing a solenoid. Consult a qualified technician if the required tests or service information are unavailable.
Can I drive with P1847?
Driving advice depends on the vehicle and symptoms. If shifting is abnormal, a warning appears, or the vehicle behaves unpredictably, avoid unnecessary driving and arrange prompt assessment. If there are no symptoms, consult vehicle-specific guidance rather than assuming the vehicle is safe or unsafe based on the code alone.
P1847 frequently asked questions
What does code P1847 mean?
Its meaning varies by manufacturer and vehicle. Supplied listings include a 2-3 shift-solenoid circuit high-voltage condition, an open transfer-case contact-plate circuit, and a brake-system ECU memory check.
Does P1847 confirm a bad shift solenoid?
No. Even when the vehicle-specific definition concerns a shift-solenoid circuit, the code indicates a detected circuit condition, not a confirmed failed solenoid.
Can I drive with P1847?
The code alone cannot determine that. Consider the vehicle-specific definition and any symptoms; abnormal shifting or unpredictable behavior warrants prompt professional assessment.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.