Source-backed diagnostic reference

P1906 Code: Meaning & Diagnostic Guide

Kickdown Pull Relay Open or Short Circuit to Ground

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P1906 mean?

  • OTHER: Kickdown Pull Relay Open or Short Circuit to Ground Source

P1906 quick answer

P1906 is listed in the supplied reference as “Kickdown Pull Relay Open or Short Circuit to Ground.” The exact meaning and diagnostic procedure may vary by vehicle, so confirm the code using vehicle-specific service information.

Is P1906 generic or manufacturer-specific?

P1906 currently has manufacturer-labelled reference definitions for OTHER. A universal generic definition is not asserted here. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P1906 works in the vehicle

An open circuit means the electrical path may be interrupted; a short to ground means a wire or circuit may be contacting ground where it should not. The code description points to the kickdown pull relay circuit, but it does not by itself confirm that the relay has failed.

P1906 symptoms

Depending on the vehicle and whether the circuit fault affects operation, possible context may include abnormal kickdown or shifting behavior, a warning light, or no noticeable symptoms. The reference does not establish specific symptoms.

Possible causes of P1906

Possibilities include a wiring or connector problem, a relay fault, or another issue in the monitored circuit. These are diagnostic possibilities, not confirmed causes.

How to diagnose P1906

  1. Confirm the vehicle’s make, model, year, and engine, then verify that P1906 applies using reliable vehicle-specific service information.
  2. Record all stored codes and relevant scan-tool data before clearing anything.
  3. With the vehicle safely powered down as directed by its service information, inspect accessible relay connectors and wiring for looseness or visible damage.
  4. Have a qualified technician test the circuit and relay against the manufacturer’s specifications; do not assume the relay is faulty based on the code alone.

How to fix P1906

Repair or replace only the component or wiring confirmed faulty by testing. Use the correct vehicle-specific wiring diagram and procedures; the supplied reference does not identify a confirmed failed part or prescribe a repair.

Can I drive with P1906?

The reference does not establish whether driving is safe or unsafe. If shifting or kickdown behavior is abnormal, warning lights appear, or the vehicle feels unreliable, avoid unnecessary driving and seek qualified diagnosis. Follow the vehicle’s owner’s manual.

P1906 frequently asked questions

What does P1906 mean?

The supplied reference describes P1906 as a kickdown pull relay circuit that is open or shorted to ground. Confirm the definition for the specific vehicle.

Does P1906 prove the relay has failed?

No. The code identifies a circuit condition, not a confirmed failed component. Wiring, connectors, or other circuit faults may also need checking.

Can I keep driving with P1906?

The available evidence does not establish a universal answer. Consider the vehicle’s behavior and owner’s manual, and arrange diagnosis—especially if shifting behavior is abnormal.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.