Source-backed diagnostic reference

P190D00 Code: Meaning & Diagnostic Guide

Coolant pump for charge pressure cooler — mechanical malfunction. The exact code and description appear in an Audi vehicle diagnostic report; the report does not establish applicability to a 2021+ BEV or PHEV.

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P190D00 mean?

  • GENERIC: Coolant pump for charge pressure cooler — mechanical malfunction. The exact code and description appear in an Audi vehicle diagnostic report; the report does not establish applicability to a 2021+ BEV or PHEV. Source

P190D00 quick answer

P190D00 is generically described as “Coolant pump for charge pressure cooler — mechanical malfunction.” It indicates a reported mechanical malfunction in the monitored system, but does not by itself confirm which part has failed or whether the code applies to a particular vehicle.

Is P190D00 generic or manufacturer-specific?

P190D00 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P190D00 works in the vehicle

A diagnostic trouble code (DTC) is a recorded fault indication. Here, “mechanical malfunction” describes the type of problem reported for the coolant pump serving the charge pressure cooler; it is not proof that the pump itself is defective. The reference shows this code in an Audi diagnostic report, but does not establish applicability to 2021-or-newer battery-electric or plug-in hybrid vehicles.

P190D00 symptoms

Depending on the vehicle and the underlying issue, there may be a warning light, a related message, or no obvious symptom. The supplied evidence does not establish specific symptoms for P190D00.

Possible causes of P190D00

Possible explanations require vehicle-specific diagnosis. The code alone does not establish a failed pump, wiring fault, coolant-flow problem, or any other confirmed cause.

How to diagnose P190D00

  1. Confirm the exact code and description using a scan tool and record any other stored codes.
  2. Check the vehicle’s service information to verify that P190D00 applies to its make, model, year, and powertrain.
  3. Have a qualified technician inspect the relevant system and follow the manufacturer’s diagnostic procedure.
  4. Ask the technician to identify the cause before replacing parts or clearing the code.

How to fix P190D00

Repair depends on the confirmed cause and vehicle-specific service information. Do not replace the pump based on the code alone. Use a qualified repairer if diagnosis involves high-voltage vehicle systems; do not attempt high-voltage repairs yourself.

Can I drive with P190D00?

The reference does not establish whether it is safe to drive with this code. Check for warning messages or changes in vehicle operation and consult the owner’s manual or a qualified technician. If the vehicle shows a serious warning or abnormal behavior, stop somewhere safe and seek assistance.

P190D00 frequently asked questions

What does P190D00 mean?

Its generic description is “Coolant pump for charge pressure cooler — mechanical malfunction.” The code reports a fault condition but does not identify a confirmed failed part.

Does P190D00 prove the coolant pump has failed?

No. The code alone does not confirm that the pump is defective; diagnosis must follow vehicle-specific service information.

Does this code apply to every Audi or to newer electric vehicles?

The reference records the code in an Audi diagnostic report, but it does not establish broad Audi applicability or applicability to 2021-or-newer BEVs or PHEVs. Verify it for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.