Source-backed diagnostic reference

P2006 Code: Meaning & Diagnostic Guide

Intake Manifold Runner Control Stuck Closed Bank 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2006 mean?

  • AUDI: Intake manifold runner control actuator failure, Powertrain Control Module (PCM) failure, Restricted vacuum lines Source
  • GENERIC: Intake Manifold Runner Control Stuck Closed Bank 1 Source
  • GENERIC: Intake Manifold Runner Control Stuck Closed (Bank 1) Source

P2006 quick answer

P2006 is a generic powertrain code for an intake manifold runner control that is detected as stuck closed on Bank 1. It describes a fault condition, not a confirmed failed part.

Is P2006 generic or manufacturer-specific?

P2006 has a generic source-backed definition in this database, with additional manufacturer-labelled references for AUDI. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2006 works in the vehicle

Intake manifold runners help manage airflow into the engine. The control system changes their position under certain conditions. “Stuck closed” means the system has detected that the Bank 1 runners are not moving as expected or remain closed; the code alone does not identify why.

P2006 symptoms

Possible symptoms include reduced power, hesitation, rough running, or an illuminated check-engine light. Some vehicles may show few noticeable symptoms. These are possibilities, not symptoms confirmed by the code itself.

Possible causes of P2006

The cause depends on the vehicle and its system design. Possible diagnostic avenues include a runner actuator or its control path, such as restricted vacuum lines on applications that use vacuum control. The supplied Audi-specific reference also lists PCM failure, but that does not establish that the PCM is faulty or that the information applies to every vehicle.

How to diagnose P2006

  1. Confirm the code and record any other stored codes and freeze-frame data.
  2. Use vehicle-specific service information to identify the Bank 1 runner-control design and test procedure.
  3. Inspect accessible wiring, connectors, and any applicable vacuum lines for damage, loose connections, or restrictions.
  4. Use appropriate scan-tool tests and manufacturer procedures to compare commanded runner movement with actual operation.
  5. Verify the repair by clearing the code and checking whether it returns under suitable test conditions.

How to fix P2006

Have the cause confirmed before replacing parts. Repairs may involve correcting a connection or control-path issue, or addressing a verified actuator fault. Consider PCM diagnosis only after the relevant circuits and components have been tested according to vehicle-specific procedures.

Can I drive with P2006?

Driving impact varies by vehicle and symptoms. If the engine runs poorly, power is reduced, or warning lights appear, arrange prompt diagnosis and avoid demanding driving. Follow the vehicle’s owner guidance if additional warnings occur.

P2006 frequently asked questions

What does P2006 mean?

It indicates that the intake manifold runner control is detected as stuck closed on Bank 1.

Does P2006 mean the runner actuator has failed?

No. The code reports a detected condition, not a confirmed failed component. Testing is needed to find the cause.

Can I keep driving with P2006?

The effect varies. Consider prompt diagnosis, especially if the vehicle has reduced power or runs poorly, and follow any additional dashboard warnings.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.