Source-backed diagnostic reference

P2008 Code: Meaning & Diagnostic Guide

Intake Manifold Runner Control Circuit/Open Bank 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2008 mean?

  • GENERIC: Intake Manifold Runner Control Circuit/Open Bank 1 Source
  • GENERIC: Intake Manifold Runner Control Solenoid Circuit Open (Bank 1) Source

P2008 quick answer

P2008 generally means the intake manifold runner control circuit is open on Bank 1. It points to an electrical circuit issue, but does not by itself identify a failed part.

Is P2008 generic or manufacturer-specific?

P2008 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2008 works in the vehicle

The intake manifold runner control changes airflow through the intake manifold. “Circuit open” means the control circuit appears interrupted or lacks the expected electrical continuity. Bank 1 is the engine bank that contains cylinder 1; the exact component layout varies by vehicle.

P2008 symptoms

Possible symptoms include a check-engine light, uneven running, reduced performance, or no noticeable change. Symptoms vary by vehicle and the underlying cause.

Possible causes of P2008

Possible causes include damaged or disconnected wiring, a poor electrical connection, a fault in the runner-control solenoid or actuator, or a problem with the control circuit. The code alone does not confirm which, if any, component has failed.

How to diagnose P2008

  1. Confirm the code with a compatible scan tool and check for other stored codes and relevant freeze-frame information.
  2. Use vehicle-specific service information to locate the Bank 1 runner-control circuit and understand its test procedure.
  3. With the ignition off, visually inspect accessible connectors and wiring for looseness, corrosion, damage, or signs of wear.
  4. Have a qualified technician test the circuit and its control components using the vehicle-specific procedure before replacing parts.
  5. Clear the code only after any identified issue is addressed, then check whether it returns.

How to fix P2008

Repair decisions should follow test results. A loose connection or damaged wire may need attention, while a control component or related circuit may require further testing. Avoid replacing parts based only on P2008; consult a qualified technician if the cause is unclear.

Can I drive with P2008?

Driving impact can vary. If the vehicle runs normally, arrange diagnosis soon and watch for changes. If it runs poorly, loses power, or shows other serious symptoms, stop in a safe place and seek professional advice.

P2008 frequently asked questions

What does P2008 mean?

P2008 generally indicates an open intake manifold runner control circuit on Bank 1.

Does P2008 prove the runner-control solenoid has failed?

No. It identifies a circuit condition, not a confirmed failed component. Wiring, connections, and control components may need testing.

Can P2008 cause drivability symptoms?

It may be associated with symptoms such as uneven running or reduced performance, but some vehicles may show no obvious symptoms.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.