Source-backed diagnostic reference

P2023 Code: Meaning & Diagnostic Guide

Intake Manifold Runner Position Sensor/Switch Circuit Intermittent Bank 2

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2023 mean?

  • GENERIC: Intake Manifold Runner Position Sensor/Switch Circuit Intermittent Bank 2 Source
  • GENERIC: Intake Manifold Runner Position Sensor/Switch Circuit Intermittent (Bank 2) Source

P2023 quick answer

P2023 means the engine computer detected an intermittent signal in the intake manifold runner position sensor or switch circuit for Bank 2. It identifies a circuit issue, not a confirmed failed part.

Is P2023 generic or manufacturer-specific?

P2023 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2023 works in the vehicle

An intake manifold runner system changes airflow through the intake manifold. The position sensor or switch reports the runner’s position to the engine computer. “Intermittent” means the signal was irregular or temporarily lost; “Bank 2” refers to the engine bank designated as Bank 2, whose location depends on the engine.

P2023 symptoms

Possible symptoms include a warning light, uneven engine performance, hesitation, or reduced power, but some vehicles may show few noticeable changes. The code alone does not confirm that any particular symptom is present.

Possible causes of P2023

Possible causes include a loose or damaged connector, wiring or circuit problem, an intermittent sensor or switch signal, or an issue with the runner mechanism. Vehicle-specific testing is needed to identify the cause.

How to diagnose P2023

  1. Confirm P2023 with a scan tool and check for related codes and freeze-frame information.
  2. Use vehicle-specific service information to locate Bank 2 and identify the relevant sensor, circuit, and runner system.
  3. Inspect the related wiring and connectors for looseness, damage, corrosion, or signs of intermittent contact.
  4. Test the circuit, sensor or switch, and runner operation using the manufacturer’s diagnostic procedure before replacing parts.

How to fix P2023

Repair or replace only the component or wiring confirmed faulty by testing. Follow vehicle-specific service information; clearing the code without addressing its cause may not resolve it.

Can I drive with P2023?

Driving impact depends on the vehicle and symptoms. Arrange diagnosis soon. If the vehicle runs poorly, loses power, or shows other concerning changes, avoid continued driving when possible and seek qualified assistance.

P2023 frequently asked questions

Does P2023 mean the position sensor has failed?

No. It reports an intermittent circuit signal and does not by itself identify a failed sensor or other component.

What does Bank 2 mean?

It identifies one engine bank as defined by the vehicle’s engine layout. Check vehicle-specific service information to locate it.

Can I clear P2023 without making a repair?

The code may return if the underlying intermittent issue remains. Diagnose the circuit and runner system before deciding on a repair.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.