Source-backed diagnostic reference

P2055 Code: Meaning & Diagnostic Guide

Reductant Injection Valve Circuit High Bank 1 Unit 2

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2055 mean?

  • GENERIC: Reductant Injection Valve Circuit High Bank 1 Unit 2 Source
  • GENERIC: Reductant Injection Valve Circuit High (Bank 1 Unit 2) Source

P2055 quick answer

P2055 is a generic powertrain code meaning “Reductant Injection Valve Circuit High (Bank 1 Unit 2).” It indicates that the control system detected a circuit signal higher than expected; it does not by itself confirm that the valve has failed.

Is P2055 generic or manufacturer-specific?

P2055 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2055 works in the vehicle

The reductant injection valve meters emissions-reduction fluid into the exhaust system. “Circuit high” describes an electrical reading, not necessarily excessive fluid flow. “Bank 1 Unit 2” identifies the location or circuit designation used by the vehicle; its exact meaning can vary by design.

P2055 symptoms

Depending on the vehicle, P2055 may appear with a check-engine or emissions-system warning, other stored codes, or reduced-power operation. Some vehicles may show no obvious symptoms. These effects are not guaranteed by the code alone.

Possible causes of P2055

Possible causes include damaged or corroded wiring or connectors, a short to voltage, a problem with the reductant injection valve, or an issue in the control circuit. Vehicle-specific testing is needed to identify the cause.

How to diagnose P2055

  1. Scan the vehicle for all stored and pending codes, and record freeze-frame information before clearing anything.
  2. Check the vehicle-specific service information to confirm what “Bank 1 Unit 2” refers to and which tests apply.
  3. With the system handled according to the manufacturer’s precautions, inspect related wiring and connectors for visible damage, corrosion, looseness, or contamination.
  4. Have a qualified technician test the circuit and valve using the vehicle’s diagnostic procedures; do not replace parts based on P2055 alone.
  5. After any repair, clear codes as directed and verify whether P2055 returns under appropriate test conditions.

How to fix P2055

The repair depends on the test results and may involve repairing wiring or connectors, addressing a control-circuit fault, or replacing a confirmed faulty valve. Use vehicle-specific service information or a qualified repair professional; the code alone does not establish a failed component.

Can I drive with P2055?

Driving impact varies by vehicle. Follow the owner’s manual and heed emissions warnings or reduced-power messages. If the vehicle runs poorly or displays a serious warning, arrange prompt professional diagnosis rather than assuming it is safe to continue driving.

P2055 frequently asked questions

What does P2055 mean?

P2055 is a generic code for a high electrical signal in the reductant injection valve circuit identified as Bank 1 Unit 2.

Does P2055 mean the reductant injection valve is bad?

No. The code identifies a circuit condition, not a confirmed failed valve. Wiring, connectors, or other circuit components may also need diagnosis.

Can I clear P2055 without repairing anything?

Clearing the code does not fix its cause. Record the diagnostic information first, and verify the repair if the code returns.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.