Source-backed diagnostic reference

P2063 Code: Meaning & Diagnostic Guide

Reductant/Regeneration Supply Control Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2063 mean?

  • GENERIC: Reductant/Regeneration Supply Control Circuit Low Source
  • GENERIC: Reductant/Regeneration Supply Control Circuit Low Source

P2063 quick answer

P2063 is a generic powertrain code meaning “Reductant/Regeneration Supply Control Circuit Low.” It indicates that the vehicle’s control system detected a low electrical signal in the relevant supply control circuit; it does not by itself identify a failed part.

Is P2063 generic or manufacturer-specific?

P2063 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2063 works in the vehicle

“Reductant” generally refers to fluid used by some emissions systems, while “regeneration” refers to a process that helps clean an emissions filter. The exact system and circuit involved depend on the vehicle. “Circuit low” describes a signal reading below the expected range, not necessarily a low fluid level.

P2063 symptoms

There may be no noticeable symptoms. Depending on the vehicle and system, a warning light or emissions-related message may appear, and emissions-system operation could be affected.

Possible causes of P2063

Possible explanations include a wiring or connector issue, a power or ground problem, or a fault in a circuit component. The code alone does not confirm the cause.

How to diagnose P2063

  1. Record the code and any other stored codes or warning messages.
  2. Check the vehicle’s service information for the meaning and test procedure specific to its year, make, and model.
  3. Have a qualified technician inspect the relevant wiring and connectors and test the circuit against vehicle-specific specifications.
  4. Confirm the repair by clearing the code only after diagnosis and checking whether it returns.

How to fix P2063

Address the cause identified by testing rather than replacing parts based only on P2063. Use vehicle-specific service information; seek qualified assistance if electrical diagnosis is needed.

Can I drive with P2063?

The code alone cannot determine whether continued driving is safe. Follow any dashboard warnings and the vehicle’s owner’s manual. If performance changes or additional warnings appear, arrange prompt professional diagnosis.

P2063 frequently asked questions

Does P2063 confirm that a component has failed?

No. It reports a low signal in a generic reductant/regeneration supply control circuit; diagnosis is needed to identify the cause.

Does “circuit low” mean the reductant fluid is low?

Not necessarily. The wording describes an electrical signal, not a confirmed fluid-level condition.

Is P2063 specific to one vehicle brand?

The supplied definition is generic. The system and diagnostic procedure can vary by vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.