P2064 Code: Meaning & Diagnostic Guide
Reductant/Regeneration Supply Control Circuit High
What does P2064 mean?
P2064 quick answer
P2064 is a generic powertrain code for “Reductant/Regeneration Supply Control Circuit High.” It indicates that the control circuit’s reported electrical signal is higher than expected; it does not, by itself, identify a failed part.
Is P2064 generic or manufacturer-specific?
P2064 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P2064 works in the vehicle
The code concerns a circuit associated with reductant or regeneration supply control. “Circuit high” describes an electrical reading, not necessarily excessive fluid pressure or quantity. The exact system and diagnostic criteria can vary by vehicle, so consult vehicle-specific service information.
P2064 symptoms
A warning light or emissions-system message may occur, but the supplied code definition does not establish any particular symptom. Some vehicles may show no obvious change in how they run.
Possible causes of P2064
Possible explanations can include a wiring, connector, power, ground, or control-component issue. These are possibilities only; P2064 alone does not confirm a cause or failed component.
How to diagnose P2064
- Record the code and any other stored codes and note the warning messages or operating conditions.
- Confirm the code definition and applicable diagnostic procedure using service information for the specific vehicle.
- Have a qualified technician check the relevant circuit and connectors using the vehicle-specific procedure.
- Use test results to identify the cause before replacing parts or clearing the code.
How to fix P2064
The appropriate repair depends on the diagnosis. Do not replace a reductant or regeneration component based on this code alone. Have circuit testing and any repair performed according to vehicle-specific service information; do not attempt hazardous high-voltage work.
Can I drive with P2064?
The code definition alone cannot establish whether continued driving is safe. Follow any vehicle warnings and the owner’s manual. If a warning indicates reduced power or the vehicle behaves abnormally, stop when safe and seek qualified assistance.
P2064 frequently asked questions
What does P2064 mean?
It means the reductant/regeneration supply control circuit is reporting a value higher than expected. The code does not identify the exact cause.
Does P2064 prove a component has failed?
No. Wiring, connectors, or other circuit-related issues are possible, but diagnosis is needed to determine the cause.
Is P2064 the same on every vehicle?
The supplied definition is generic. The system details and diagnostic procedure may differ by vehicle.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.