Source-backed diagnostic reference

P2113 Code: Meaning & Diagnostic Guide

Throttle/Pedal Position Sensor B Minimum Stop Performance

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2113 mean?

  • GENERIC: Throttle/Pedal Position Sensor B Minimum Stop Performance Source
  • GENERIC: Throttle Actuator Control System Forced Limited RPM Source

P2113 quick answer

P2113 generally means “Throttle/Pedal Position Sensor B Minimum Stop Performance.” It indicates that the engine computer detected an unexpected reading or performance issue at the sensor’s minimum-stop position. Code descriptions can vary between databases, so confirm the definition for the specific vehicle.

Is P2113 generic or manufacturer-specific?

P2113 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2113 works in the vehicle

The powertrain control module monitors throttle or pedal position signals. “Sensor B” identifies a particular signal or circuit, and “minimum stop” refers to its expected reading near the closed-throttle or released-pedal position. P2113 alone does not identify a confirmed failed part. One supplied database lists a different description, so vehicle-specific service information is important.

P2113 symptoms

Depending on the vehicle and underlying issue, possible symptoms include a warning light, reduced engine power, limited engine speed, hesitation, rough running, or difficulty responding to the accelerator. Some vehicles may show few noticeable symptoms.

Possible causes of P2113

Possibilities include a throttle or pedal position signal that is out of expected range, a wiring or connector problem, an issue with the throttle actuator or throttle body, or a related control-system fault. The code alone does not establish which, if any, component has failed.

How to diagnose P2113

  1. Confirm P2113 with a scan tool and record any other codes and available freeze-frame data.
  2. Check the vehicle-specific service information for the applicable code definition and test procedure.
  3. Inspect accessible throttle and pedal sensor wiring and connectors for visible damage, looseness, or corrosion.
  4. Have a qualified technician compare live sensor readings with the vehicle’s specifications and check related circuits before replacing parts.
  5. Clear the code only after addressing the identified cause, then verify whether it returns under appropriate test conditions.

How to fix P2113

Repair depends on the confirmed cause. A technician may need to correct a connection or wiring issue, or service a related throttle or pedal-control component. Avoid replacing parts based on the code alone; electronic throttle systems can require vehicle-specific procedures.

Can I drive with P2113?

Driving impact varies. If the vehicle has reduced power, unpredictable throttle response, or difficulty maintaining speed, stop somewhere safe and arrange professional assessment rather than continuing in traffic. If there are no noticeable symptoms, have the code checked soon and follow the vehicle’s owner guidance.

P2113 frequently asked questions

What does P2113 mean?

It generally refers to Throttle/Pedal Position Sensor B Minimum Stop Performance, meaning the computer detected an unexpected signal or performance at the sensor’s minimum-stop position.

Does P2113 prove the throttle or pedal sensor is bad?

No. The code identifies a detected performance issue, not a confirmed failed component. Wiring, connectors, related throttle-control parts, or other causes may need to be checked.

Can I keep driving with P2113?

It depends on the symptoms and vehicle. Reduced power or unpredictable accelerator response can make driving unsafe; stop safely and seek professional help if either occurs.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.