P2114 Code: Meaning & Diagnostic Guide
Throttle/Pedal Position Sensor C Minimum Stop Performance
What does P2114 mean?
P2114 quick answer
P2114 is generally defined as “Throttle/Pedal Position Sensor C Minimum Stop Performance.” It indicates that the engine computer detected an issue with the expected minimum position or performance of a throttle or pedal position signal; the code alone does not identify a failed part.
Is P2114 generic or manufacturer-specific?
P2114 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P2114 works in the vehicle
The powertrain code P2114 relates to electronic throttle or accelerator-pedal position monitoring. “Minimum stop performance” refers to whether a monitored position signal behaves as expected near its minimum range. A second generic reference describes P2114 as a throttle actuator control system forced-below-limit RPM condition, so wording may vary across code databases. Confirm the definition using reliable service information for the specific vehicle.
P2114 symptoms
Possible symptoms include a warning light, reduced engine power, limited acceleration, or changes in throttle response. A vehicle may also show no obvious symptoms. These are possibilities, not symptoms established by the code itself.
Possible causes of P2114
Possible causes can include a position-sensor signal that is out of range, a wiring or connector problem, a throttle-control issue, or a related electronic fault. P2114 alone does not confirm which cause applies or that any particular component has failed.
How to diagnose P2114
- Record all stored and pending codes and any available freeze-frame data before clearing codes.
- Check the vehicle-specific service information to confirm how P2114 is defined and which signals or circuits are monitored.
- Inspect accessible wiring and connectors for visible damage, loose connections, or corrosion, following the manufacturer’s safety procedures.
- Use an appropriate scan tool and vehicle-specific diagnostic procedure to compare relevant throttle and pedal position data.
- Have a qualified technician test the suspected circuits and components before replacing parts.
How to fix P2114
The repair depends on what testing finds. Address verified wiring, connection, adjustment, or component faults according to vehicle-specific service information. Avoid replacing a throttle body or position sensor based on P2114 alone. Electronic throttle systems should be diagnosed by a qualified technician when the cause is unclear.
Can I drive with P2114?
Driving impact can vary. If the vehicle has reduced power, unpredictable throttle response, or difficulty maintaining speed, stop somewhere safe and arrange professional assessment rather than continuing in traffic. If there are no noticeable symptoms, consult the vehicle’s manual and have the code checked promptly; the code alone cannot establish that driving is safe.
P2114 frequently asked questions
What does code P2114 mean?
It is generally described as Throttle/Pedal Position Sensor C Minimum Stop Performance, although generic references may use different wording for throttle-control behavior.
Does P2114 mean the throttle position sensor has failed?
No. The code identifies a detected condition, not a confirmed failed part. Testing is needed to distinguish a sensor, wiring, connector, or other throttle-control issue.
Can I drive with P2114?
That depends on how the vehicle behaves. Reduced power or unpredictable throttle response can make driving unsafe; stop safely and seek help if these occur.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.