Source-backed diagnostic reference

P2115 Code: Meaning & Diagnostic Guide

Throttle/Pedal Position Sensor D Minimum Stop Performance

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2115 mean?

  • GENERIC: Throttle/Pedal Position Sensor D Minimum Stop Performance Source
  • GENERIC: Throttle/Pedal Position Sensor A Minimum Stop Performance Source

P2115 quick answer

P2115 is a generic powertrain code for throttle/pedal position sensor minimum-stop performance. It means the control system detected a reading or behavior at the sensor’s minimum position that did not meet expected criteria. The code alone does not identify a confirmed failed part.

Is P2115 generic or manufacturer-specific?

P2115 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2115 works in the vehicle

The throttle or accelerator pedal position sensor reports position to the vehicle’s control system. “Minimum stop” refers to the lowest position recognized by the system, typically associated with a closed throttle or released pedal. Generic code references differ on whether the sensor is labeled A or D, so check vehicle-specific service information for the correct interpretation.

P2115 symptoms

Possible symptoms, depending on the vehicle and underlying issue, include a warning light, reduced engine power, poor throttle response, or difficulty maintaining idle. Some vehicles may show few noticeable symptoms.

Possible causes of P2115

Possible causes include an out-of-range sensor signal, wiring or connector problems, a throttle or pedal mechanism that does not reach its expected position, or a required adjustment or relearn procedure. P2115 by itself does not confirm any of these causes.

How to diagnose P2115

  1. Record all stored and pending codes and review freeze-frame data before clearing anything.
  2. Look up the vehicle-specific definition and diagnostic procedure; generic references differ on the sensor label.
  3. Inspect accessible sensor wiring and connectors for visible damage, looseness, or corrosion.
  4. Using appropriate scan data and service specifications, compare reported throttle or pedal position with the expected minimum-position reading.
  5. Have a qualified technician test the relevant circuits and perform any specified adjustment or relearn procedure before replacing parts.

How to fix P2115

Repair should follow the confirmed test results and vehicle-specific service information. A wiring or connector repair, adjustment, relearn, or sensor replacement may be appropriate depending on diagnosis; do not replace a component based on the code alone.

Can I drive with P2115?

Driving impact varies by vehicle and symptoms. If throttle response is reduced, unpredictable, or the vehicle enters a limited-power mode, avoid unnecessary driving and arrange a prompt inspection. Follow the vehicle’s warning messages and owner’s manual.

P2115 frequently asked questions

What does P2115 mean?

P2115 is a generic code indicating that throttle or pedal position sensor minimum-stop performance did not meet the control system’s expected criteria.

Does P2115 mean the position sensor has failed?

No. The code identifies a detected performance issue, not a confirmed failed component. Wiring, connectors, mechanism movement, or a required adjustment may also need investigation.

Why do code references label the sensor differently?

Generic references list P2115 with different sensor labels, including A and D. The vehicle-specific service information is needed to determine which signal and test procedure apply.

Can I keep driving with P2115?

That depends on how the vehicle behaves. Reduced or unpredictable throttle response warrants avoiding unnecessary driving and arranging an inspection.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.