Source-backed diagnostic reference

P2138 Code: Meaning & Diagnostic Guide

Throttle/Pedal Position Sensor/Switch D/E Voltage Correlation

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2138 mean?

  • AUDI: Accelerator Pedal Position (APP) assembly failure, Powertrain Control Module (PCM) failure, Throttle Position Sensor (TPS) failure, Wiring issue Source
  • GENERIC: Throttle/Pedal Position Sensor/Switch D/E Voltage Correlation Source
  • GENERIC: Throttle/Pedal Position Sensor "D"/"E" Voltage Correlation Source

P2138 quick answer

P2138 is a generic powertrain code for a mismatch between the voltage signals from throttle or accelerator-pedal position sensors D and E. It identifies a signal-correlation problem, not a confirmed failed part.

Is P2138 generic or manufacturer-specific?

P2138 has a generic source-backed definition in this database, with additional manufacturer-labelled references for AUDI. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2138 works in the vehicle

The vehicle’s control module compares related position-sensor signals to check that they agree as expected. “Voltage correlation” means the signals do not match the relationship the module expects. The exact sensor labels and acceptable readings can vary by vehicle.

P2138 symptoms

Depending on the vehicle and fault conditions, possible signs include a warning light, reduced engine power, or unusual response when pressing the accelerator. Some vehicles may show few noticeable symptoms.

Possible causes of P2138

Possible causes include a sensor signal problem, damaged or loose wiring or connectors, or an issue elsewhere in the control system. P2138 alone does not establish which component, if any, has failed.

How to diagnose P2138

  1. Record P2138 and any other stored codes and note when the warning or drivability issue occurs.
  2. Use vehicle-specific service information to identify the relevant sensors, circuits, and expected signal behavior.
  3. Check accessible wiring and connectors for looseness, corrosion, or visible damage.
  4. Have a qualified technician compare sensor readings using a scan tool and test the circuits as specified for the vehicle.
  5. Confirm the repair by clearing the code when appropriate and checking whether it returns.

How to fix P2138

Choose a repair only after testing identifies the cause. Depending on the findings, this may involve correcting a connection or wiring fault or addressing a verified sensor or control-system issue. Avoid replacing parts based on the code alone.

Can I drive with P2138?

Driving impact can vary. If acceleration or power is reduced or unpredictable, avoid driving in situations where that could create risk and arrange prompt professional diagnosis. Follow the vehicle’s warning messages and owner’s manual.

P2138 frequently asked questions

Does P2138 mean the accelerator pedal sensor has failed?

No. It indicates that related position-sensor signals do not correlate as expected; diagnosis is needed to identify the cause.

Can P2138 cause reduced power?

Reduced power is possible on some vehicles, but symptoms and protective responses vary.

Can I diagnose P2138 from the code alone?

No. The code points to a signal-correlation issue but does not identify a confirmed failed component. Vehicle-specific testing is needed.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.