Source-backed diagnostic reference

P213D Code: Meaning & Diagnostic Guide

EGR Throttle Control Circuit B High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P213D mean?

  • GENERIC: EGR Throttle Control Circuit B High Source
  • GENERIC: EGR Throttle Control Circuit B High Source

P213D quick answer

P213D is a generic powertrain code meaning “EGR Throttle Control Circuit B High.” It indicates that the engine computer detected a higher-than-expected electrical signal in that circuit; it does not, by itself, confirm which part has failed.

Is P213D generic or manufacturer-specific?

P213D has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P213D works in the vehicle

EGR means exhaust gas recirculation. The EGR throttle control circuit relates to controlling airflow associated with the EGR system. “Circuit B High” describes the electrical signal detected, not necessarily a mechanically stuck throttle or a specific failed component. The exact circuit design and test procedure can vary by vehicle.

P213D symptoms

Depending on the vehicle and the cause, there may be a warning light, changes in engine performance, rough running, or no noticeable symptoms. These are possibilities, not symptoms established by the code alone.

Possible causes of P213D

Possible explanations include a wiring or connector problem, an electrical fault in a control component, or an issue with the control circuit. Vehicle-specific diagnosis is needed before identifying a cause.

How to diagnose P213D

  1. Record P213D and check for other stored codes and relevant vehicle-specific information.
  2. Use the service information for the exact vehicle to identify Circuit B and its specified tests.
  3. With the vehicle safely off, inspect accessible wiring and connectors for damage, corrosion, looseness, or signs of a poor connection.
  4. Have a qualified technician test the circuit according to the vehicle’s procedures before replacing parts.

How to fix P213D

The appropriate repair depends on test results. A wiring or connection repair may be needed, or further testing may identify another circuit issue. Do not replace an EGR component based only on P213D; consult vehicle-specific service information or a qualified technician.

Can I drive with P213D?

The code alone cannot establish whether the vehicle is safe to drive. If performance is impaired, the engine runs poorly, or warning lights indicate a serious problem, stop in a safe place and seek professional advice. Otherwise, arrange diagnosis promptly and follow the vehicle’s owner’s manual.

P213D frequently asked questions

Does P213D confirm that the EGR throttle has failed?

No. It identifies a high signal in the generic EGR throttle control circuit B; diagnosis is needed to determine the cause.

What does “circuit high” mean?

It means the control system detected an electrical signal above its expected range. It does not identify the failed part by itself.

Can I keep driving with P213D?

The code alone does not determine drivability or safety. Consider the vehicle’s symptoms and owner’s manual, and have the fault checked promptly.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.