Source-backed diagnostic reference

P2145 Code: Meaning & Diagnostic Guide

EGR Vent Control Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2145 mean?

  • GENERIC: EGR Vent Control Circuit High Source
  • GENERIC: EGR Vent Control Circuit High Source

P2145 quick answer

P2145 is a generic diagnostic trouble code meaning “EGR Vent Control Circuit High.” It indicates that the engine computer detected a higher-than-expected electrical signal in the EGR vent control circuit; it does not identify a failed part by itself.

Is P2145 generic or manufacturer-specific?

P2145 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2145 works in the vehicle

EGR stands for exhaust gas recirculation. The vent control circuit concerns electrical control of an EGR vent function. “Circuit high” describes the signal detected by the computer, not necessarily high voltage at a particular component or a confirmed component failure. The exact circuit design and diagnostic limits vary by vehicle.

P2145 symptoms

Depending on the vehicle and the underlying issue, possible symptoms may include a check-engine light, changes in engine performance, rough running, or no noticeable symptoms. These are possibilities, not symptoms established by the code alone.

Possible causes of P2145

Possible areas to investigate include wiring or connector problems, a fault in the vent-control circuit, or an issue with a related control component. The code alone does not confirm any of these causes.

How to diagnose P2145

  1. Confirm P2145 with a suitable scan tool and check for other stored codes and relevant freeze-frame data.
  2. Look up the vehicle-specific diagnostic procedure and wiring information; circuit layouts and test values can differ.
  3. With the vehicle safely powered down as required by its service information, inspect accessible EGR-related wiring and connectors for visible damage, corrosion, looseness, or contamination.
  4. Have a qualified technician test the circuit and related components using the vehicle-specific procedure before replacing parts.

How to fix P2145

Choose repairs only after testing confirms the cause. Depending on the findings, a repair may involve a connection, wiring, or a related control component. Clear the code and verify the repair using the vehicle-specific procedure. Do not replace parts based on P2145 alone.

Can I drive with P2145?

P2145 alone does not establish whether a vehicle is safe to drive. Check the owner’s manual and arrange diagnosis. If the vehicle runs poorly, loses power, or shows other serious warnings, stop in a safe place and seek professional advice.

P2145 frequently asked questions

What does P2145 mean?

It is a generic code for “EGR Vent Control Circuit High,” indicating that the engine computer detected a higher-than-expected signal in that circuit.

Does P2145 mean the EGR valve has failed?

No. The code identifies a circuit condition, not a confirmed failed component. Testing is needed to find the cause.

Can I diagnose P2145 without vehicle-specific information?

A basic visual inspection may help, but circuit details and test procedures vary by vehicle. Use the correct service information or consult a qualified technician.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.