Source-backed diagnostic reference

P2149 Code: Meaning & Diagnostic Guide

Fuel Injector Group B Supply Voltage Circuit/Open

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2149 mean?

  • GENERIC: Fuel Injector Group B Supply Voltage Circuit/Open Source
  • GENERIC: Fuel Injector Group B Supply Voltage Circuit/Open Source

P2149 quick answer

P2149 is a generic OBD-II code for “Fuel Injector Group B Supply Voltage Circuit/Open.” It indicates a detected issue in the electrical supply circuit for injector group B; it does not by itself identify a failed part.

Is P2149 generic or manufacturer-specific?

P2149 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2149 works in the vehicle

The engine control system monitors voltage in the fuel-injector supply circuit. “Circuit/open” means the circuit may be interrupted or its electrical reading is outside the expected range. The exact meaning of injector group B and the test procedure can vary by vehicle.

P2149 symptoms

Depending on the vehicle and the underlying issue, possible symptoms include rough running, misfires, reduced power, hard starting, or an illuminated check-engine light. A vehicle may also have few noticeable symptoms.

Possible causes of P2149

Possible causes include damaged or loose wiring or connectors, a poor electrical connection, a fuse or supply problem, or an injector or control-circuit fault. These are possibilities, not confirmed causes; the code alone does not identify a failed component.

How to diagnose P2149

  1. Record the code and any other stored or pending codes, along with available freeze-frame data.
  2. Check vehicle-specific service information for the definition of injector group B and the recommended test procedure.
  3. With the engine off, inspect accessible injector wiring and connectors for looseness, damage, corrosion, or signs of overheating.
  4. Have a qualified technician test the circuit’s power supply, wiring continuity, and related components using the vehicle’s service procedure.
  5. Repair any verified fault, then clear the code and confirm whether it returns under appropriate test conditions.

How to fix P2149

Repair should follow the diagnostic findings. This may involve correcting a wiring or connector problem or addressing another verified supply or control-circuit fault. Avoid replacing injectors or other parts based on P2149 alone.

Can I drive with P2149?

Driving impact depends on symptoms and the vehicle. If the engine runs roughly, loses power, stalls, or the check-engine light flashes, stop when safe and seek professional assistance. If there are no noticeable symptoms, arrange diagnosis promptly and follow the vehicle’s manual.

P2149 frequently asked questions

Does P2149 confirm a bad fuel injector?

No. It identifies a detected issue in the injector group B supply-voltage circuit, not a confirmed failed injector.

Can P2149 mean an open wire?

Yes. “Open” can describe an interrupted circuit, but testing is needed to determine whether wiring, a connection, or another part of the circuit is responsible.

Is P2149 the same on every vehicle?

It is a generic code, but the meaning of injector group B and the diagnostic procedure can vary by vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.