P2167 Code: Meaning & Diagnostic Guide
Throttle/Pedal Position Sensor E Maximum Stop Performance
What does P2167 mean?
P2167 quick answer
P2167 is a generic powertrain code meaning “Throttle/Pedal Position Sensor E Maximum Stop Performance.” It indicates that the control system detected an issue with Sensor E’s expected maximum-stop performance; it does not, by itself, identify a failed part.
Is P2167 generic or manufacturer-specific?
P2167 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P2167 works in the vehicle
Throttle and pedal position sensors provide position readings to the vehicle’s control system. “Maximum stop performance” refers to how a sensor’s reading behaves at its expected upper stop. The meaning of Sensor E and the test details can vary by vehicle, so consult the service information for the specific make, model, and year.
P2167 symptoms
Possible symptoms may include a warning light, reduced power, or changes in throttle response, but the code alone does not confirm that any particular symptom will occur.
Possible causes of P2167
Possible causes can include a sensor signal outside the expected range, a wiring or connector issue, or a problem with related components or calibration. These are possibilities, not confirmed causes; vehicle-specific testing is needed.
How to diagnose P2167
- Record all stored codes and available freeze-frame data before clearing anything.
- Check the vehicle’s service information for the exact definition and diagnostic procedure for Sensor E.
- Visually inspect relevant connectors and wiring for damage, corrosion, looseness, or poor contact.
- Use a suitable scan tool and the vehicle-specific procedure to compare sensor readings with expected values.
- Repair or replace parts only after testing identifies the cause, then verify whether the code returns.
How to fix P2167
There is no single repair established by P2167 alone. Follow the vehicle-specific diagnostic procedure; the eventual repair may involve wiring, a connector, a sensor, or another related issue. Avoid replacing parts based only on the code.
Can I drive with P2167?
Driving impact cannot be determined from this code alone. If throttle response is abnormal, power is reduced, or the vehicle is difficult to control, stop somewhere safe and arrange professional assistance. Otherwise, have the code checked promptly and follow the vehicle’s warning messages and manual.
P2167 frequently asked questions
Does P2167 confirm that the throttle or pedal sensor has failed?
No. It reports a Sensor E maximum-stop performance issue, but further vehicle-specific diagnosis is needed to identify the cause.
Can I tell which part Sensor E refers to from the code alone?
No. Sensor naming and diagnostic details can vary by vehicle. Check the service information for the specific make, model, and year.
Should I clear P2167 before diagnosis?
Record the code and any freeze-frame data first. Clearing it may remove useful diagnostic information.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.