Source-backed diagnostic reference

P2199 Code: Meaning & Diagnostic Guide

Intake Air Temperature Sensor 1/2 Correlation

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2199 mean?

  • GENERIC: Intake Air Temperature Sensor 1/2 Correlation Source
  • GENERIC: Intake Air Temperature Sensor 1/2 Correlation Source

P2199 quick answer

P2199 is a generic diagnostic trouble code meaning “Intake Air Temperature Sensor 1/2 Correlation.” It indicates that the two monitored intake-air-temperature readings do not agree as expected; it does not identify a confirmed failed part.

Is P2199 generic or manufacturer-specific?

P2199 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2199 works in the vehicle

“Correlation” means the control system compares the readings from intake air temperature sensor 1 and sensor 2 and detects a difference outside its expected range. The exact monitoring criteria depend on the vehicle.

P2199 symptoms

The code reference does not specify symptoms. Depending on the vehicle and the underlying issue, there may be a warning light or changes in how the engine runs, or no obvious symptoms.

Possible causes of P2199

The code alone does not establish a cause. Areas to investigate may include sensor readings, wiring or connectors, and vehicle-specific control or calibration issues; none is confirmed by this code description alone.

How to diagnose P2199

  1. Check the vehicle-specific service information for how P2199 is monitored and what readings are expected.
  2. Read and record all codes and available freeze-frame data before clearing anything.
  3. Compare live readings for intake air temperature sensors 1 and 2 under the conditions described in the service information.
  4. Inspect relevant wiring and connectors for visible damage or poor connections.
  5. Test the circuits and sensors using the vehicle-specific diagnostic procedure; avoid replacing parts based only on the code.

How to fix P2199

Repair or replace a part only when testing identifies a fault. Follow vehicle-specific service information, then clear the code and confirm whether it returns under the relevant conditions.

Can I drive with P2199?

The code reference does not establish whether driving is safe or unsafe. Consider the vehicle’s behavior and warning indicators; if it runs poorly or symptoms worsen, limit use and arrange a professional diagnosis.

P2199 frequently asked questions

What does P2199 mean?

It means the intake air temperature sensor 1 and sensor 2 readings do not correlate as expected.

Does P2199 prove an intake air temperature sensor has failed?

No. The code identifies a disagreement between readings, not a confirmed failed component. Diagnosis is needed to find the cause.

Can I diagnose P2199 without vehicle-specific information?

Basic code and live-data checks can help, but the expected readings and test procedures vary by vehicle. Use the applicable service information.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.