Source-backed diagnostic reference

P2240 Code: Meaning & Diagnostic Guide

O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2240 mean?

  • GENERIC: O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1 Source
  • GENERIC: O2 Sensor Pumping Current Circuit (Bank 2 Sensor 1) Source

P2240 quick answer

P2240 is a generic powertrain code for a problem in the oxygen sensor positive-current control or pumping-current circuit for Bank 2 Sensor 1. The exact wording varies by reference; this code alone does not confirm which part has failed.

Is P2240 generic or manufacturer-specific?

P2240 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2240 works in the vehicle

Bank 2 is the side of the engine that does not contain cylinder 1. Sensor 1 is the upstream oxygen sensor, before the catalytic converter. Its current circuit helps the engine control module interpret the sensor’s exhaust measurement. An open-circuit description generally means the expected electrical path may be interrupted.

P2240 symptoms

Depending on the vehicle and the underlying cause, the check-engine light may be on. Driveability or fuel-economy changes are possible, but the code does not establish that these symptoms will occur.

Possible causes of P2240

Possible causes include a damaged or disconnected sensor connector, wiring damage, a circuit fault, or a problem with the sensor. The code alone cannot identify the cause or confirm a failed component.

How to diagnose P2240

  1. Confirm P2240 with a scan tool and check for other stored codes and available freeze-frame information.
  2. Use vehicle-specific service information to identify Bank 2 Sensor 1 and the relevant circuit.
  3. With the vehicle safely parked and the exhaust cool, visually inspect the sensor connector and accessible wiring for looseness or damage.
  4. Have a qualified technician test the circuit and sensor according to the vehicle’s service procedure before replacing parts.

How to fix P2240

Repair any wiring or connector fault that testing confirms, or replace a sensor only if diagnosis identifies it as faulty. Follow service information for the specific vehicle; clearing the code without addressing its cause may not resolve it.

Can I drive with P2240?

P2240 alone does not determine whether continued driving is safe. If the vehicle runs abnormally, the warning light flashes, or other serious symptoms occur, stop driving when safe and seek professional advice. Otherwise, arrange diagnosis promptly and follow the vehicle’s owner’s manual.

P2240 frequently asked questions

What does P2240 mean?

It indicates a detected issue in the oxygen sensor current-control circuit for Bank 2 Sensor 1; generic references describe it as a positive-current control or pumping-current circuit fault.

Does P2240 prove the oxygen sensor is bad?

No. Wiring, connectors, or other circuit problems may also be involved. Testing is needed to identify the cause.

What do Bank 2 and Sensor 1 mean?

Bank 2 is the engine side without cylinder 1, and Sensor 1 is the upstream oxygen sensor, before the catalytic converter.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.