Source-backed diagnostic reference

P2245 Code: Meaning & Diagnostic Guide

O2 Sensor Reference Voltage Circuit Low Bank 1 Sensor 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2245 mean?

  • GENERIC: O2 Sensor Reference Voltage Circuit Low Bank 1 Sensor 1 Source
  • GENERIC: O2 Sensor Reference Voltage Circuit Low (Bank 1 Sensor 1) Source

P2245 quick answer

P2245 is a generic powertrain code meaning the oxygen sensor reference-voltage circuit is reading low for Bank 1 Sensor 1. The code identifies a circuit condition, not a confirmed failed part.

Is P2245 generic or manufacturer-specific?

P2245 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2245 works in the vehicle

The engine computer monitors an electrical reference-voltage circuit associated with the upstream oxygen sensor on Bank 1. “Low” means the monitored voltage is below the expected range. Bank 1 is the side containing cylinder 1; Sensor 1 is generally the sensor before the catalytic converter.

P2245 symptoms

Depending on the vehicle and the cause, the check-engine light may be on. Engine performance, fuel economy, or emissions readings may also be affected, but symptoms are not established by the code alone.

Possible causes of P2245

Possible causes include damaged or corroded wiring or connectors, a short to ground, a problem in a shared reference-voltage circuit, or a faulty oxygen sensor. The code by itself does not confirm which, if any, is responsible.

How to diagnose P2245

  1. Record the code and check for other stored codes and freeze-frame data, which shows operating conditions when the fault was detected.
  2. Use vehicle-specific service information to confirm the circuit layout and expected test values.
  3. With the vehicle safely parked and the ignition off, visually inspect accessible sensor wiring and connectors for damage, corrosion, or loose connections.
  4. Have a qualified technician test the reference-voltage circuit and related wiring before replacing parts.

How to fix P2245

Repair should be based on test results. Wiring or connector faults may need repair; a sensor should be replaced only if testing identifies it as faulty. Avoid probing or repairing circuits without the correct service information and equipment.

Can I drive with P2245?

The code alone does not determine whether the vehicle is safe to drive. Check the owner’s manual and arrange diagnosis soon; stop driving and seek assistance if the vehicle runs poorly, shows a serious warning, or develops other concerning symptoms.

P2245 frequently asked questions

Does P2245 mean the oxygen sensor has failed?

No. It reports a low reference-voltage circuit condition. Wiring, connectors, or another circuit issue may also be involved.

What does Bank 1 Sensor 1 mean?

Bank 1 is the engine side with cylinder 1. Sensor 1 generally refers to the oxygen sensor upstream of the catalytic converter.

Can I diagnose P2245 from the code alone?

No. The code points to a circuit condition, so inspection and electrical testing are needed to identify the cause.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.