Source-backed diagnostic reference

P2248 Code: Meaning & Diagnostic Guide

O2 Sensor Reference Voltage Performance Bank 2 Sensor 1

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2248 mean?

  • GENERIC: O2 Sensor Reference Voltage Performance Bank 2 Sensor 1 Source
  • GENERIC: O2 Sensor Reference Voltage Circuit Range/Performance (Bank 2 Sensor 1) Source

P2248 quick answer

P2248 is a generic powertrain code for an oxygen-sensor reference-voltage circuit performance issue at Bank 2 Sensor 1. It identifies a circuit reading that may be outside expected performance; it does not by itself confirm a failed sensor or other component.

Is P2248 generic or manufacturer-specific?

P2248 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2248 works in the vehicle

The engine computer monitors the reference voltage associated with the Bank 2 Sensor 1 oxygen sensor. “Range/performance” means the monitored signal did not behave as expected. Bank 2 and Sensor 1 identify the sensor’s location under the vehicle’s engine layout; check vehicle-specific service information to locate it.

P2248 symptoms

P2248 may appear with a check-engine light. Changes in engine performance or fuel use are possible, but the code alone does not establish that any particular symptom is present.

Possible causes of P2248

Possible areas to investigate include the sensor, its wiring or connectors, and the related reference-voltage circuit. The code alone does not identify a confirmed cause or failed component.

How to diagnose P2248

  1. Confirm P2248 with a compatible scan tool and note any other stored codes and available freeze-frame data.
  2. Consult vehicle-specific service information for the circuit description, sensor location, and diagnostic procedure.
  3. With the vehicle safely parked and the engine off, visually check accessible wiring and connectors for obvious damage, looseness, or contamination.
  4. Have a qualified technician test the circuit and sensor against the vehicle maker’s specifications before replacing parts.

How to fix P2248

Address the cause confirmed by diagnosis rather than replacing the oxygen sensor based on P2248 alone. Use vehicle-specific procedures; seek qualified service for electrical testing or repairs.

Can I drive with P2248?

The code alone cannot determine whether continued driving is safe. Check the owner’s manual and seek professional advice, especially if warning lights, unusual operation, or worsening symptoms occur.

P2248 frequently asked questions

What does P2248 mean?

It indicates an oxygen-sensor reference-voltage circuit performance issue for Bank 2 Sensor 1.

Does P2248 prove the oxygen sensor has failed?

No. It points to a monitored circuit performance issue, but diagnosis is needed to identify the cause.

Can I diagnose P2248 without vehicle-specific information?

A scan tool can confirm the code, but location and test specifications vary. Consult service information for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.