Source-backed diagnostic reference

P2291 Code: Meaning & Diagnostic Guide

Injector Control Pressure Too Low - Engine Cranking

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2291 mean?

  • GENERIC: Injector Control Pressure Too Low - Engine Cranking Source
  • GENERIC: Injector Control Pressure Too Low - Engine Cranking Source

P2291 quick answer

P2291 is a generic diagnostic trouble code meaning “Injector Control Pressure Too Low - Engine Cranking.” It indicates that pressure was detected as too low while the engine was cranking; the code alone does not identify the cause.

Is P2291 generic or manufacturer-specific?

P2291 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2291 works in the vehicle

“Engine cranking” means the starter is turning the engine in an attempt to start it. “Injector control pressure” refers to pressure used in controlling fuel injection. The exact system and diagnostic procedure can vary by vehicle.

P2291 symptoms

Because the code is associated with cranking, it may appear alongside difficult starting or an engine that cranks without starting. The code by itself does not confirm any particular symptom.

Possible causes of P2291

P2291 identifies a low-pressure condition during cranking, not a failed part. The available definition does not establish why the pressure is low; further vehicle-specific diagnosis is needed.

How to diagnose P2291

  1. Confirm P2291 with a suitable scan tool and note any other codes and available freeze-frame data.
  2. Check the vehicle’s service information for the correct meaning and diagnostic procedure for its make, model, and engine.
  3. Have a qualified technician assess the pressure reading and related system using the vehicle-specific procedure.
  4. Use test results to determine whether a repair is needed; do not replace parts based on the code alone.

How to fix P2291

There is no single repair specified by this code. The appropriate fix depends on vehicle-specific test results. Have a qualified technician diagnose the cause before replacing components.

Can I drive with P2291?

The code alone does not determine whether the vehicle is safe to drive. If the engine will not start, stalls, or runs poorly, avoid relying on it and arrange appropriate professional assessment.

P2291 frequently asked questions

What does P2291 mean?

It means injector control pressure is too low while the engine is cranking.

Does P2291 identify a failed component?

No. It reports a low-pressure condition during cranking but does not identify its cause or a failed part.

Can P2291 cause a no-start?

It may be associated with difficult starting or a crank-but-no-start condition, but the code alone does not confirm the symptom or its cause.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.