Source-backed diagnostic reference

P2299 Code: Meaning & Diagnostic Guide

Brake Pedal Position/Accelerator Pedal Position Incompatible

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2299 mean?

  • GENERIC: Brake Pedal Position/Accelerator Pedal Position Incompatible Source
  • GENERIC: Brake Pedal Position / Accelerator Pedal Position Correlation Source

P2299 quick answer

P2299 is a generic powertrain code for incompatible brake-pedal and accelerator-pedal position signals. It identifies a detected signal mismatch, not a confirmed failed part.

Is P2299 generic or manufacturer-specific?

P2299 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2299 works in the vehicle

The vehicle’s control system monitors brake- and accelerator-pedal position information. P2299 indicates that the reported positions or their relationship did not match what the system expected. The code alone does not identify why.

P2299 symptoms

The check-engine light may be on, and some vehicles may limit power or respond differently to the accelerator. Symptoms vary; a stored code does not confirm that any particular symptom is present.

Possible causes of P2299

Possible explanations include an obstruction affecting pedal movement, inconsistent pedal-position signals, a wiring or connector issue, or another control-system problem. These are possibilities to investigate, not confirmed causes.

How to diagnose P2299

  1. Record all stored and pending codes and available freeze-frame information before clearing anything.
  2. Check that floor mats or other objects are not obstructing either pedal and that both pedals move freely.
  3. Use a suitable scan tool and vehicle-specific service information to compare brake- and accelerator-pedal data.
  4. If the data is inconsistent, have the relevant sensors, connectors, wiring, and related systems tested before replacing parts.

How to fix P2299

Repair should follow the test results and the vehicle’s service information. A pedal-position sensor should not be replaced based on P2299 alone; any required calibration or relearn should use the specified procedure.

Can I drive with P2299?

Driving impact depends on the vehicle and symptoms. If pedal response is unexpected, power is substantially limited, or braking behavior seems abnormal, stop in a safe place and arrange professional help. If the vehicle behaves normally, have the code assessed promptly and follow the owner’s manual.

P2299 frequently asked questions

What does P2299 mean?

It means the vehicle detected incompatible or out-of-correlation brake-pedal and accelerator-pedal position information.

Does P2299 prove that a pedal sensor has failed?

No. The code reports a signal relationship problem and does not confirm which component, if any, has failed.

Can I clear P2299 without diagnosing it?

Clearing the code does not address its cause and may erase useful diagnostic information. Record codes and freeze-frame data first, then diagnose the issue.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.