Source-backed diagnostic reference

P2308 Code: Meaning & Diagnostic Guide

Ignition Coil C Secondary Circuit

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2308 mean?

  • AUDI: Ignition coil failure, Powertrain Control Module (PCM) failure, Wiring issue Source
  • GENERIC: Ignition Coil C Secondary Circuit Source
  • GENERIC: Ignition Coil C Secondary Circuit Source

P2308 quick answer

P2308 is a generic powertrain code for the Ignition Coil C Secondary Circuit. It indicates that the vehicle’s control system detected an issue in the circuit associated with coil C; it does not, by itself, confirm which part has failed.

Is P2308 generic or manufacturer-specific?

P2308 has a generic source-backed definition in this database, with additional manufacturer-labelled references for AUDI. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2308 works in the vehicle

The secondary circuit is the part of the ignition system that delivers high voltage from an ignition coil to create a spark. “Coil C” identifies a circuit or coil designation, which can vary by vehicle. Check vehicle-specific service information to identify it.

P2308 symptoms

Depending on the vehicle and the underlying issue, possible signs may include rough running, misfires, reduced power, or an illuminated check-engine light. The code alone does not confirm that any of these symptoms are present.

Possible causes of P2308

The generic definition identifies the ignition coil C secondary circuit but does not establish a failed component. A separate Audi-specific reference lists an ignition-coil problem, a PCM problem, or a wiring issue as possibilities; those possibilities should not be assumed to apply to other vehicles.

How to diagnose P2308

  1. Confirm the code with a scan tool and note any other stored codes and available freeze-frame data.
  2. Check the vehicle’s service information for how coil C is identified and for the diagnostic procedure that applies to that model.
  3. Have a qualified technician inspect the relevant wiring and connectors and test the ignition system using the vehicle-specific procedure.
  4. Use test results to distinguish among a circuit, coil, control-module, or other issue before replacing parts.

How to fix P2308

The repair depends on the confirmed cause. A technician may need to address a wiring or connection problem, an ignition-coil issue, or another fault identified by testing. Do not replace the PCM based on this code alone.

Can I drive with P2308?

Driving impact depends on how the vehicle is running. If it is misfiring, losing power, or running poorly, limit driving and arrange prompt inspection; follow the vehicle’s owner’s manual if warning lights or symptoms worsen.

P2308 frequently asked questions

Does P2308 confirm that ignition coil C has failed?

No. It identifies an issue in the coil C secondary circuit, but diagnosis is needed to determine the cause.

What does “secondary circuit” mean?

It refers to the high-voltage side of the ignition system that helps create a spark.

Is P2308 specific to one vehicle manufacturer?

The supplied generic definition is not manufacturer-specific. Coil designations and diagnostic procedures can vary by vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.