P2347 Code: Meaning & Diagnostic Guide
Cylinder 12 Above Knock/Combustion Vibration Sensor Threshold
What does P2347 mean?
P2347 quick answer
P2347 is a generic diagnostic trouble code meaning “Cylinder 12 Above Knock/Combustion Vibration Sensor Threshold.” It indicates that the reported vibration signal for cylinder 12 exceeded a threshold; it does not by itself identify the cause or confirm a failed part.
Is P2347 generic or manufacturer-specific?
P2347 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.
How P2347 works in the vehicle
The engine control system monitors vibration associated with combustion. “Above threshold” means the signal was higher than the system’s expected limit. The exact monitoring strategy and applicable components can vary by vehicle, so check vehicle-specific service information.
P2347 symptoms
Possible symptoms may include an illuminated check-engine light, reduced performance, or unusual engine noise, but the code alone does not establish that any of these are present.
Possible causes of P2347
Possible areas to investigate include the vibration signal or its wiring and connections, operating conditions that produce abnormal combustion vibration, or an engine-mechanical issue. These are diagnostic possibilities, not confirmed causes.
How to diagnose P2347
- Confirm P2347 with a suitable scan tool and record any other codes and available freeze-frame data.
- Check vehicle-specific service information to confirm how the code is monitored and which tests apply.
- Inspect relevant wiring and connectors for visible damage, looseness, or corrosion, where accessible.
- Use the specified diagnostic procedure to assess the signal and investigate possible combustion or mechanical causes before replacing parts.
How to fix P2347
Base repairs on test results and vehicle-specific procedures. Do not assume the sensor or another component has failed solely because P2347 is stored.
Can I drive with P2347?
The code alone cannot determine whether driving is safe. If the engine runs roughly, makes unusual noise, loses power, or shows other serious warning signs, stop in a safe place and seek professional advice. Otherwise, arrange diagnosis promptly and follow the vehicle’s manual.
P2347 frequently asked questions
Does P2347 prove that a sensor has failed?
No. It describes a vibration signal above a threshold; further testing is needed to identify the cause.
Does P2347 have the same diagnostic procedure on every vehicle?
No. The definition is generic, but monitoring details and test procedures can vary by vehicle.
Can I keep driving with P2347?
The code alone does not establish whether driving is safe. Consider the vehicle’s behavior and warning signs, and consult the owner’s manual or a qualified technician.
Search variants and canonical URL
Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.