Source-backed diagnostic reference

P2367 Code: Meaning & Diagnostic Guide

Cylinder 12 Pressure Sensor Circuit Range/Performance

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2367 mean?

  • GENERIC: Cylinder 12 Pressure Sensor Circuit Range/Performance Source
  • GENERIC: Cylinder 12 Pressure Sensor Circuit Range/Performance Source

P2367 quick answer

P2367 is a generic diagnostic trouble code meaning “Cylinder 12 Pressure Sensor Circuit Range/Performance.” It indicates that the monitored sensor signal is outside an expected range or does not behave as expected; it does not by itself identify a failed part.

Is P2367 generic or manufacturer-specific?

P2367 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2367 works in the vehicle

“Circuit range/performance” describes a signal that the vehicle’s control system considers implausible or outside its expected operating pattern. The code’s applicability and diagnostic details can vary by vehicle, and not every engine has a cylinder 12.

P2367 symptoms

Depending on the vehicle and the underlying issue, a warning light or changes in engine performance may occur. The code alone does not confirm that any particular symptom is present.

Possible causes of P2367

Possible areas to investigate include the sensor signal, its wiring or connections, and related control-system data. These are diagnostic possibilities, not confirmed causes or failed components.

How to diagnose P2367

  1. Confirm the code with a suitable scan tool and check for additional codes or relevant freeze-frame data.
  2. Use vehicle-specific service information to verify that P2367 applies to the vehicle and to find the correct diagnostic procedure.
  3. Have a qualified technician assess the sensor signal and inspect accessible wiring and connectors for visible damage or poor connections.
  4. Compare scan-tool readings with the vehicle-specific specifications before deciding whether a component needs repair or replacement.

How to fix P2367

Do not replace a sensor based on P2367 alone. The appropriate repair depends on vehicle-specific testing and the confirmed cause; consult a qualified technician if the diagnosis is unclear.

Can I drive with P2367?

The code alone does not establish whether the vehicle is safe to drive. Follow the vehicle’s warning messages and manual, and seek professional advice if performance changes or other warnings appear.

P2367 frequently asked questions

What does P2367 mean?

It is a generic code for a cylinder 12 pressure sensor circuit range or performance issue.

Does P2367 prove the pressure sensor has failed?

No. It identifies an unexpected sensor-circuit signal, but further testing is needed to find the cause.

Can every vehicle have P2367?

No. The code is generic, but vehicle applicability and diagnostic details vary, and some engines do not have a cylinder 12.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.