Source-backed diagnostic reference

P2377 Code: Meaning & Diagnostic Guide

Turbocharger/Supercharger Inlet Pressure Sensor B Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2377 mean?

  • GENERIC: Turbocharger/Supercharger Inlet Pressure Sensor B Circuit High Source
  • GENERIC: Turbocharger Inlet Pressure Sensor B Circuit High Source

P2377 quick answer

P2377 is a generic powertrain code for a high electrical signal in the Turbocharger/Supercharger Inlet Pressure Sensor B circuit. It identifies a circuit reading, not a confirmed failed part.

Is P2377 generic or manufacturer-specific?

P2377 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2377 works in the vehicle

The engine control module monitors the inlet-pressure sensor circuit. “Circuit high” means the signal is higher than the expected range; it does not necessarily mean inlet pressure is physically too high. The exact sensor location and diagnostic specifications can vary by vehicle.

P2377 symptoms

Some vehicles may show a warning light, reduced performance, or no noticeable symptoms. The supplied code evidence does not establish which symptoms, if any, will occur.

Possible causes of P2377

Possible causes include a faulty pressure sensor, damaged or loose wiring or connectors, a problem with the sensor’s power or ground circuit, or an issue in the control module. These are possibilities, not confirmed causes.

How to diagnose P2377

  1. Use the vehicle’s service information to confirm how P2377 is defined and where Sensor B is located for that vehicle.
  2. Scan for other codes and record freeze-frame data before clearing anything.
  3. Check the sensor connector and accessible wiring for looseness, corrosion, damage, or signs of repair.
  4. Compare sensor readings with expected values using vehicle-specific service information and suitable scan or test equipment.
  5. If needed, test the sensor and its wiring, power, and ground circuits according to the manufacturer’s procedure.
  6. After addressing the verified cause, clear the code and check whether it returns.

How to fix P2377

Repair or replace only the part or wiring confirmed faulty by testing. Use vehicle-specific service information; the code alone does not justify replacing the sensor.

Can I drive with P2377?

Driving impact depends on the vehicle and any accompanying symptoms. If performance is reduced, the engine runs abnormally, or warning lights appear, limit driving and arrange inspection. Follow the vehicle’s owner’s manual for warning-light guidance.

P2377 frequently asked questions

Does P2377 mean the pressure sensor has failed?

No. It reports a high signal in the sensor circuit. The sensor, wiring, connector, or another part of the circuit may need testing.

Does “circuit high” mean boost pressure is too high?

Not necessarily. The description refers to an electrical signal being higher than expected, not a confirmed physical pressure condition.

Can I diagnose P2377 without vehicle-specific information?

Basic code and wiring checks may help, but sensor location and test specifications vary. Use service information for the specific vehicle.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.