Source-backed diagnostic reference

P2387 Code: Meaning & Diagnostic Guide

EGR Sensor E Circuit Low

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2387 mean?

  • GENERIC: EGR Sensor E Circuit Low Source
  • GENERIC: EGR Sensor E Circuit Low Source

P2387 quick answer

P2387 is a generic powertrain code meaning the EGR Sensor E circuit has a low electrical signal. It points to a detected signal condition, not proof that a particular sensor has failed.

Is P2387 generic or manufacturer-specific?

P2387 has a generic source-backed definition in this database. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2387 works in the vehicle

EGR means exhaust gas recirculation. The control system monitors a circuit associated with an EGR sensor or signal identified as “E.” “Circuit low” means the reported voltage or signal was below the expected range; the exact sensor, circuit layout, and thresholds depend on the vehicle.

P2387 symptoms

Some vehicles may show a warning light, run differently, or have no obvious symptoms. These possibilities vary by vehicle, and the code alone does not establish which symptoms are present.

Possible causes of P2387

Possible causes include a wiring or connector problem, a signal or supply issue, an EGR-related sensor fault, or another issue affecting the circuit. Vehicle-specific testing is needed before identifying a cause.

How to diagnose P2387

  1. Confirm the exact code and record any other stored codes and available freeze-frame data.
  2. Check the vehicle’s service information to identify what “EGR Sensor E” refers to for that specific model.
  3. Inspect the relevant wiring and connectors for visible damage, loose connections, or corrosion.
  4. Use the vehicle-specific diagnostic procedure to check circuit signals and related components.
  5. Repair only the fault confirmed by testing, then clear the code and verify whether it returns.

How to fix P2387

There is no single repair implied by P2387. Follow vehicle-specific diagnostic information and confirm the circuit fault before replacing parts. Avoid work on high-voltage systems; use a qualified technician when the diagnosis or repair requires it.

Can I drive with P2387?

The code alone cannot determine whether the vehicle is safe to drive. Check the owner’s manual and consider the vehicle’s behavior and warning lights. If it runs poorly, loses power, or shows serious warnings, stop driving when safe and arrange professional assessment.

P2387 frequently asked questions

Does P2387 prove the EGR sensor has failed?

No. It indicates a low signal in the EGR Sensor E circuit, but wiring, connections, or other circuit conditions may also be involved.

Is the meaning of EGR Sensor E identical on every vehicle?

The generic definition is “EGR Sensor E Circuit Low,” but the exact component and circuit identification can vary by vehicle.

Can I diagnose P2387 from symptoms alone?

No. Symptoms may be absent or vary. Vehicle-specific circuit checks are needed to determine the cause.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.