Source-backed diagnostic reference

P2402 Code: Meaning & Diagnostic Guide

EVAP System Leak Detection Pump Control Circuit High

Reference status: This page preserves source-backed code definitions for discovery. Manufacturer/model applicability, repair steps and safety conclusions are not treated as verified unless a manufacturer-specific verified report is available.

What does P2402 mean?

  • AUDI: Evap leak detection pump failure, Powertrain Control Module (PCM) failure, Wiring issue Source
  • GENERIC: EVAP System Leak Detection Pump Control Circuit High Source
  • GENERIC: EVAP Leak Detection Pump Control Circuit High Source

P2402 quick answer

P2402 generally means the vehicle detected a high signal or voltage in the EVAP leak-detection pump control circuit. It identifies a circuit condition, not a confirmed failed pump.

Is P2402 generic or manufacturer-specific?

P2402 has a generic source-backed definition in this database, with additional manufacturer-labelled references for AUDI. The exact vehicle make, model, year and powertrain should be confirmed before using a definition for diagnosis.

How P2402 works in the vehicle

The EVAP system limits fuel vapors from escaping into the atmosphere. The leak-detection pump helps check that system for leaks. “Circuit high” means the control circuit’s signal was higher than expected; the code alone does not identify the cause.

P2402 symptoms

The check-engine light may be the only noticeable sign. Depending on the vehicle and the underlying issue, there may also be an emissions-test failure or an EVAP-related symptom. These are possibilities, not symptoms established by the code itself.

Possible causes of P2402

Possible areas to investigate include the pump circuit, wiring, connectors, or related control components. P2402 alone does not confirm which part, if any, has failed.

How to diagnose P2402

  1. Confirm P2402 with a scan tool and check for other stored codes and available freeze-frame data.
  2. Consult vehicle-specific service information for the correct circuit description and test procedure.
  3. Inspect accessible wiring and connectors in the pump circuit for visible damage, corrosion, or loose connections.
  4. Have a qualified technician test the circuit and pump against the vehicle’s specifications before replacing parts.

How to fix P2402

The appropriate repair depends on test results. A technician may need to address a wiring or connector problem, a pump-circuit issue, or another control-related fault. Avoid replacing the pump based on P2402 alone.

Can I drive with P2402?

P2402 by itself does not establish whether the vehicle is safe or unsafe to drive. Check the owner’s manual and arrange diagnosis; seek prompt help if the vehicle develops drivability problems or other concerning symptoms.

P2402 frequently asked questions

Does P2402 mean the leak-detection pump has failed?

No. It reports a high signal in the pump control circuit, but further testing is needed to identify the cause.

Can wiring cause P2402?

Wiring or connector issues are possible areas to check, but the code does not confirm them.

Can I diagnose P2402 from the code alone?

No. Vehicle-specific service information and circuit testing are needed to narrow down the cause.

Search variants and canonical URL

Capitalization, underscores, hyphens, colons and spaces are normalized to this canonical code identity so alternate scan-tool formats do not create duplicate pages.